Abstract:A building may be subjected to a variety of accidental loads during its service life. Partially precast concrete (PC) beams are a primary structural component. Their impact resistance can have a substantial impact on the overall safety of a structure when it is subjected to an impact load. In this study, numerical analyses were performed on the dynamic response of PC beams strengthened with bonded steel plates subjected to impact loading. The model was verified from four aspects: energy conversion, failure form, impact force–time history curve, and midspan displacement–time history curve. The dynamic response eigenvalues of the peak impact force, peak midspan displacement, and residual midspan displacement were compared between the numerical simulations and experimental tests. The relative inaccuracy of the peak impact force ranged from 9.51% to 14.0%, with an average value of 11.9%. The average relative error for the midspan displacement was −0.09%, with the greatest relative errors varying between −0.64% and 0.3%. The residual value errors of the midspan displacement ranged from −0.95% to 2.38%, with an average relative error of 0.94%. On this basis, the effects of the impact mass, impact height, width, and length of the bonded steel plate on the impact resistance of the components were evaluated. Furthermore, the differences in the equivalent plastic strain contours, impact force–time history curves, and midspan displacement–time history curves under different parameters were compared. The results demonstrated that the failure modes and flexural deformations of the test beams were influenced by the impact mass and impact height. The increase in the length and width of the steel plate had no effect on the impact force response, but the peak and residual values of the midspan displacement decreased, which could significantly increase the impact resistance of the beams. Lastly, the impact mass m, the impact height h, the thickness t of the bonded steel plate, the length of the bonded steel plate hs, and the width of the bonded steel plate bs were all taken into account in the fitting formula. These five parameters were used to predict the peak impact force response, the peak value of the midspan displacement, and the residual value of the midspan displacement. The results demonstrated that the fitting formula had small errors and could accurately reflect the dynamic responses of the PC beams strengthened with bonded steel plates under impact loading.

Study on the Response of Prestressed Reinforced Concrete Slabs with High Reinforcement Ratio under Low Speed Impact

Influence of Different Sites on Impact Response of Steel-Plate Concrete Containment against a Large Commercial Aircraft

Comparative assessment of impact analysis methods applied to large commercial aircraft crash on reinforced concrete containment

Sensitivity Analysis of Steel-Plate Concrete Containment against a Large Commercial Aircraft

Study on horizontal dynamic response of engineering structures with buffer-layer under impact action of fuel container

Investigating the Effect of Supports on Reinforced Concrete Slab Subjected to Oblique Missile Impact

Spallation Mechanism of RC Slabs under Contact Detonation

Behavior of prestressed fiber-reinforced steel-lined concrete slabs under projectile impact

Finite Element Analyses on the Soft Projectile Impact Testing of a Wall-floor-wall Reinforced Concrete Structure

Numerical Simulation on Failure Process of Prestressed Concrete Structures under Impact Load

Numerical and Analytical Investigations of the Impact Resistance of Partially Precast Concrete Beams Strengthened with Bonded Steel Plates

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Nonlinear Time History Analysis of a Pre-Stressed Concrete Containment Vessel Model under Japan's March 11 Earthquake

Aircraft impact analysis of nuclear safety-related concrete structures: A review

Analysis of impact force of large commercial aircraft on rigid wall and nuclear power plant containment

Damage assessment of prefabricated prestressed channel slab under plane charge blast

An experimental investigation of plain, reinforced, and prestressed concrete slabs subjected to non-deformable projectile impact

EXPERIMENTAL STUDY OF NUCLEAR POWER PLANT CONCRETE CONTAINMENT STRENGTHENED WITH EXTERNALLY WRAPPED CARBON FIBER REINFORCED POLYMER SHEETS

Failure Mechanism of Reinforced Concrete Subjected to Projectile Impact Loading

Numerical Analysis of the Impact Resistance of Partially Precast Concrete Beams and Prediction of the Displacement Response