3D Printed Small-Radius Thermosetting Cutout Composites Via Continuous Fiber Ring Reinforcement: Effectively Retaining Intact Strength

Yueke Ming,Ashraf Aboelenien,Gerhard Ziegmann,Feng Wang,Zhibo Xin,Hong Xiao,Jin Zhou,Ben Wang,Yugang Duan

DOI: https://doi.org/10.2139/ssrn.4290448

2022-01-01

SSRN Electronic Journal

Abstract:A major concern in the design of continuous fiber-reinforced polymer composites is the inclusion of holes or cutout structures, which will disrupt fiber alignment and cause stress concentration. Herein, a 3D printing method using continuous carbon fiber-reinforced thermosetting epoxy composites was developed to fabricate open-hole structures. To maintain fiber continuity and join additional circular contours around the hole periphery, a novel path planning strategy integrated with height transition and hammered printing patterns was proposed. Based on the generated continuous path codes, small radius circles (2-6 mm) and open-hole plates were accurately printed, in which this additional fiber filling served as a “reinforcing ring” to hinder deformation, postpone crack propagation, and relieve stress concentration. Compared with the conventional laminates and drilled composites, a 75.3% increment in the tensile strength and a 28.8% increment in the bearing strength were achieved by the printed samples, which effectively retain the intensity and safety of fastened composite parts. Furthermore, their improvement mechanism was investigated in detail through failure analysis and strain evolution, where high fiber content (55.2 wt.%) around the hole, tenacious fiber-resin interface, and optimized printing trajectory can be attributed. Finally, the parallel comparisons with other additive manufacturing processes and previously reported arrangement strategies, indicate the great potential of the proposed technique as an automated and high-performance manufacturing alternative for cutout composite assemblies in aerospace and other related engineering industries.