Abstract:Boron (B), normally present in ground water and sea water, is a vital micronutrient for plants, but is also toxic in excessive amounts. Under typical conditions, aqueous boron is present as boric acid (H3BO3), which is uncharged, making B particularly challenging to remove by mechanisms commonly applicable to removal of trace constituents. Adsorption of B onto aluminum hydroxide solids (Al(OH)3(s)) generated using aluminum-based electrocoagulation (EC) is a promising strategy for B removal. Infrared spectroscopy analysis indicated complexation of B(OH)3 with aluminum hydroxide solids via surface hydroxyl groups, while X-ray and infrared spectroscopy results indicated that the structure of the Al(OH)3(s) was influenced both by EC operating conditions and by water quality. A linear adsorption model predicted B removal well when initial concentrations were lower than 50 mg/L, but fit the experimental data poorly at higher initial B concentrations. The Langmuir adsorption model provided a good fit for a broader range of initial B concentrations (5-1000 mg/L). Factors affecting B adsorption during the EC process, including current intensity, Al dissolution rate, boron concentration, pH, and total dissolved solid (TDS), were investigated. Increasing current intensity initially led to a higher Al dissolution rate, and therefore higher B adsorption, but there was a limit, as further increases in current intensity caused rapid formation of Al(OH)3(s) having a large particle size and a low capacity to complex B. Boron removal decreased as its concentration increased. The best removal of B occurred at pH 8, corresponding to a slightly positive zeta potential for aluminum hydroxide and a small but significant fraction of negatively charged B species. Higher TDS concentrations facilitated the use of higher current intensities, i.e., the limit on the effective Al dissolution rate increased with increasing TDS. Two real water samples (river water and oilfield produced water) spiked with B were treated using EC, resulting in up to 50% B removal from river water (C0 = 10 mg/L, current = 0.2 A) in 2 h, and 80% B removal from produced water (C0 = 50 mg/L, current = 1.0 A) in 2 h.

Removal of Boron in Aqueous Solution by Magnesium Oxide with the Hydration Process

Magnetically modified MgO nanoparticles as an efficient adsorbent for phosphate ions removal from wastewater

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents: A Review

Study on adsorption of magnesium hydroxide

Preparation and application of MgO-loaded tobermorite to simultaneously remove nitrogen and phosphorus from wastewater

Materials for Boron Adsorption

Boron Removal in Aqueous Solutions Using Adsorption with Sugarcane Bagasse Biochar and Ammonia Nanobubbles

Preparation and application of magnesium oxide nanoparticles for superiorly fluoride removal

Radiation synthesis of polyvinyl alcohol/acrylic acid/magnesium oxide composite hydrogel for removal of boron from its aqueous solution

Boron removal by electrocoagulation: Removal mechanism, adsorption models and factors influencing removal

A new multi-hydroxyl methacrylate based adsorbent for boron removal from aqueous solutions

Removal of Thorium and Uranium from Aqueous Solution by Adsorption on Hydrated Manganese Dioxide

Facile Synthesis of Core-Shell Magnetic Iron Oxide@SiO2-NH2 Nanoparticles and Their Application in Rapid Boron Removal from Aqueous Solutions

Adsorption performance and mechanism of MgO-loaded tobermorite for Mn 2+ with high concentration in wastewater

Disposal of Boron-Containing Wastwater by Lightly-Burnt Dolomite

High-efficiency fluoride removal using hierarchical flower-like magnesium oxide: Adsorption characteristics and mechanistic insights

A Spherical N-Methyl-D-Glucamine-Based Hybrid Adsorbent for Highly Efficient Adsorption of Boric Acid from Water

Efficient Removal of Boron Acid by N-methyl-d-glucamine Functionalized Silica–polyallylamine Composites and Its Adsorption Mechanism

Sustainable boron removal from aqueous solutions using pomegranate peel adsorbents: A comprehensive study on isotherms, kinetics, and thermodynamics

Efficient and fast arsenate removal from water by in-situ formed magnesium hydroxide

Efficient Removal of Methylene Blue Dye from Aqueous Media Using Facilely Synthesized Magnesium Borate/Magnesium Oxide Nanostructures