Adaptive Drilling of Film Cooling Holes of Turbine Vanes Based on Registration of Point Clouds

Xue-Cheng Xi,Jian Wang,Si-Meng Zhu,Jie-Yu Ma,Wan-Sheng Zhao

DOI: https://doi.org/10.1109/tii.2023.3254664

IF: 12.3

2023-01-01

IEEE Transactions on Industrial Informatics

Abstract:The manufacture of film cooling holes on turbine guide vanes of an aeroengine suffers from the contour errors resulting from a casting process. It is therefore necessary to adjust positions and orientations of cooling holes for each vane. This article proposes an adaptive compensation machining method based on a combination of a principal component analysis (PCA) iterative closest point (PCA-ICP) registration method and an orthocenter mapping method. First, a registration is carried out between an ideal point cloud and a measured point cloud by a laser measurement machine to obtain a transformation matrix. Then, the exit center of a cooling hole is obtained by an orthocenter mapping method. Simulation results show that the machining errors of vanes can be improved from $\pm$ 0.1 to $\pm$ 0.03 mm. Machining tests show that with a combination of the PCA-ICP registration and orthocenter mapping methods, cooling holes can be drilled adaptively to meet the machining requirements.