Abstract:In the traditional SJ MOSFET structure, n/p pillars with the same doping concentrations in the drift region are introduced to decrease the on-resistance. However, SJ MOSFET will turn on the parasitic diodes due to fast reverse recovery, further inducing severe oscillation in the reverse recovery of the device and the corresponding adverse effect on the circuit. In this study, a fast recovery vertical superjunction (SJ) MOSFET with n-Si and p-3C-SiC pillars was studied. Unlike other structures, such as the 4H-SiC superjunction UMOSFET with a heterojunction diode or the ultra-low recovery charge cell-distributed Schottky contacts SJ-MOSFET with integrated isolated NMOS, we introduce a Schottky barrier diode (SBD) on the source contact at the top of the n-Si pillar in the SJ-MOSFET to improve the device reverse recovery. The simulation software TCAD Silvaco was utilized to simulate the device properties. Compared with the conventional Si SJ, the proposed Si/SiC SJ with the Schottky barrier diode (SBD) connected demonstrated a lower reverse recovery charge, which was reduced by 90.5%, respectively. The waveform of the reverse recovery current demonstrates that the electrons in the device are withdrawn from SBD during reverse recovery, preventing the opening of the parasitic diode in the SJ MOSFET. Finally, another structure is illustrated to decrease the gate capacitance by introducing a thin p-base layer between the gate metal and N-Si pillar so that it can improve the switching characteristics of devices. The open-loss and off-loss of the improved device were reduced by 33% and 42.3%, respectively.

Optimization of Reverse Recovery Characteristics Based on Termination Structure for 700V Super-Junction VDMOS

Fabrication and Optimization of a High-Reliability 700 V Super-Junction MOSFET with Segmented P-Buried RESURF Termination

Design of high voltage super junction VDMOS

Novel High-Tolerance Termination with Resistive Field Plate for 600 V Super-Junction Vertical Double-Diffused MOSFET

A High Voltage Superjunction MOSFET with Enhanced Reverse Recovery Performance

Enhanced Reverse Recovery Performance in Superjunction MOSFET with Reduced Hole-Barrier

A Fast Recovery Vertical Superjunction MOSFET with n-Si and p-3C-SiC Pillars

A Variation Laterl Doping Layer and Lightly Doped Region Compensated Superjunction LDMOS

A New Super-Junction Vdmos Realizing Fast Reverse Recovery

Novel Superjunction LDMOS (>950 V) with a Thin Layer SOI

Experimental studies on robustness of super junction VDMOS during the body diode reverse recovery

A Superjunction MOSFET with Ultralow Reverse Recovery Charge and Low Switching Losses

A Multiepi Superjunction MOSFET With a Lightly Doped MOS-Channel Diode for Improving Reverse Recovery

Optimization and Experiments of Lateral Semi-Superjunction Device Based on Normalized Current-Carrying Capability

High voltage SJ-pLDMOS with Variation Lateral Doping drift layer

Edge Termination Design of a 700-V Triple RESURF LDMOS with N-Type Top Layer

Design of a 700 V DB-nLDMOS Based on Substrate Termination Technology

High-Voltage SOI Deep Trench LDMOS with Quasi Vertical Super Junction Structure

Novel Self-Modulated Lateral Superjunction Device Suppressing the Inherent 3-D JFET Effect

Concept and design of super junction devices

A Novel SiC Superjunction Trench MOSFET with Integrated Heterojunction Diode for Improved Performance