Abstract:Functional Materials Letters, Ahead of Print. BaTiO3/Nb:SrTiO3 thin film oxides have been deposited on SrTiO3 substrates using a pulsed laser deposition system. Different annealing methods were thereafter used to assess the ferroelectricity of the grown films. The residual polarization value, 2Pr, of 4.205 [math]C/cm2 and saturated residual polarization value, 2Pmax, of 15.484 [math]C/cm2 were obtained using in-situ annealing. After performing rapid thermal annealing (RTA) annealing, the residual polarization value rose to 4.676 [math]C/cm2 and the saturated residual polarization value rose to 18.723 [math]C/cm2. Furthermore, a comparison of results showed that the saturation test frequency of the in-situ annealing was 10 times higher than the saturation test frequency of the RTA. This could be explained by the fact that the secondary high-temperature annealing led to a decrease in the conductivity of the doped oxide and, thereby, a decrease in the effective electric field that was applied to both ends of the BTO (BaTiO3) film. Thus, a lower frequency was required to ensure a flip of all ferroelectric domains within the BTO film. By testing the fatigue frequency at 100 kHz, 10[math] stable cycles in both annealing methods and the results confirmed the good stability of the device performance. A linear fit analysis of the [math]–[math] curves showed under in-situ annealing the presence of both a bulk-limited current mechanism that was dominated by the space charge limited current (SCLC) and Pool–Frenkel (PF) mechanisms, and an interface-limited current that was dominated by the Fowler–Nordheim (FN) mechanism in the structure. After RTA annealing, the conducting mechanism is ohmic contact at low electric field and the SCLC mechanism at high field strength. The results show that after RTA annealing, the quality and ferroelectric properties of the films are significantly improved compared to those under in-situ annealing. These results showed that the BTO/NSTO/STO (BaTiO3/Nb:SrTiO3/SrTiO3) structure had a standard test frequency as well as reliable stability. The BTO/NSTO/STO structure showed, therefore, promising applications in future nonvolatile information memory devices.

Tristate Ferroelectric Memory Effect Attained by Tailoring the Ferroelectric Behavior in Bi1/2(Na0.8K0.2)1/2TiO3 with Eu Doping

Direct observation of room-temperature out-of-plane ferroelectricity and tunneling electroresistance at the two-dimensional limit

Epitaxial Integration of Tetragonal Bifeo3 with Silicon for Nonvolatile Memory Applications

Electro and Photon Double-Driven Non-Volatile and Non-Destructive Readout Memory in Pt/Bi0.9Eu0.1FeO3/Nb:SrTiO3 Heterostructures

Ferroelectric properties and current mechanisms of BaTiO[math]/Nb:SrTiO[math] thin films

Ferroelectric stability and fatigue mechanism of BNKT ceramics by Nb doping

Cu-Doping-Modified Order State, Ferroelectric Property, Multiscale Inhomogeneities, and Local Structure in the Relaxor KTa 1– x Nb x O 3 Crystal

Improvement of memristive switching of Pb(Zr0.52Ti0.48)O3/Nb:SrTiO3 heterostructures via La doping

Phase-field simulations of easily switchable vortex structure for multilevel low-power ferroelectric memory

Ferroelectric properties and large electric field-induced strain of Eu<SUP>3+</SUP>-doped Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-BaTiO3 lead-free ceramics

Improved Memory Functions In Multiferroic Tunnel Junctions With A Dielectric/Ferroelectric Composite Barrier

In-situ TEM Observation of Multilevel Storage Behavior in Low Power FeRAM Device

Interfacial Ion Intermixing Effect on Four-Resistance States in La0.7Sr0.3MnO3/BaTiO3/La0.7Sr0.3MnO3 Multiferroic Tunnel Junctions.

Giant Shape Memory and Domain Memory Effects in Antiferroelectric Single Crystals

Ferroelectric thin films and electrodes for random access memories

Nd-doped Bismuth Titanate based ferroelectric field effect transistor: Design, fabrication, and optimization

Photo-induced stabilization and enhancement of the ferroelectric polarization in Ba$_{0.1}$Sr$_{0.9}$TiO$_{3}$/La$_{0.7}$Ca(Sr)$_{0.3}$MnO$_{3}$ thin film heterostructures

Non-volatile voltage-controlled magnetization in single-phase multiferroic ceramics at room temperature

Memristive Behaviors in Pt/Batio3/Nb:Srtio3 Ferroelectric Tunnel Junctions

Enhanced Energy Storage Performance and Efficiency in Bi0.5(Na0.8K0.2)0.5TiO3-Bi0.2Sr0.7TiO3 Relaxor Ferroelectric Ceramics via Domain Engineering

Electric-field-induced non-ergodic relaxor to ferroelectric transition in BiFeO3- x SrTiO3 ceramics