Abstract:When thin-walled composite cylindrical shells are subjected to combined loads, not only will they buckle, but they could fail under overstressing. Buckling-failure and stress-failure are two types of failure that compete mutually, and if one of them occurs, the structure loses its ability to carry the load. However, there is a lack of study, and very little attention was paid to the competitive-failure of the composite cylindrical shells under combined loads. To bridge this research gap, a competitive failure analysis framework of degraded composite cylindrical shells exposed to combined axial compression and external pressure loads was developed, considering the nonlinear buckling-failure interacting curve approach for buckling-failure analysis and the Tsai-Wu failure criterion for stress-failure analysis. The material degradation model was adopted to modify the properties of the failed ply based on two degrading philosophies. The proposed framework agrees well with the published results. Extensive parametric studies are accomplished and presented to detect the failure mode of composites. For material parametric study, the variation of material properties does not significantly affect the shape of the normalized buckling-failure interacting curve, while it appreciably affects the behavior of the stress-failure interacting curve. Moreover, it is found that as the proportions of the longitudinal compressive strength to longitudinal modulus and transverse tensile strength to transverse modulus of composite materials increase, the tendency for buckling-failure increases; otherwise, stress-failure happens. For a geometric parametric study, decreasing the radius-to-thickness ratio leads to an increase in the shape of the buckling-failure interacting curve and the possibility of stress-failure.

Buckling and Strength Failure for Unstiffened and Ring-Stiffened Composite Shells

Buckling and material failure analyses for ring-stiffened composite shells subjected to hydrostatic pressure

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

Experimental and Numerical Analyses on Buckling and Strength Failure of Composite Cylindrical Shells under Hydrostatic Pressure

Effect of Rib Profile on Critical Buckling Pressure of Ring-Stiffened Composite Shells under Hydrostatic Pressure

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Effects of Mid-Strengthening on Stability Analysis of Composite Cylindrical Shell under External Pressure

Strain Response and Buckling Behavior of Composite Cylindrical Shells Subjected to External Pressure with One End Fixed and the Other under Free Boundary Conditions

Buckling Analysis of Moderately Thick Carbon Fiber Composite Cylindrical Shells under Hydrostatic Pressure

Experimental and numerical buckling analysis of carbon fiber composite cylindrical shells under external pressure

Buckling performance of stiffened polymer composite cylindrical shell

Mechanical Properties and Failure Analysis of Ring-Stiffened Composite Hulls under Hydrostatic Pressure

Buckling of ring-stiffened cylindrical shell under axial compression: Experiment and numerical simulation

Experimental study on buckling behavior of composite cylindrical shells with and without circular holes under hydrostatic pressure

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Stress–strain and Burst Failure Analysis of Fiber Wound Composite Material High-Pressure Vessel

The Competition Between Buckling and Stress Failure of Degraded Composite Cylindrical Shell under Combined Axial Compression and External Pressure Loads

Buckling and Stress-Competitive Failure Analyses of Composite Laminated Cylindrical Shell under Axial Compression and Torsional Loads

Biaxial Tensile Test and Simulation of Rear Pressure Bulkhead Reinforcement Components with Composite

Buckling behavior of laminated composite cylinders under external hydrostatic pressure

A novel model for buckling of composite shell: Ring stiffened shell and stiffened shell with cutout under hydrostatic pressure