Abstract:The average share of nuclear energy in electricity production is expected to increase under the background of the global pursuit towards carbon neutrality. Conjugating with its rapid development, the wave of decommissioning and dismantling (D&D) of nuclear facilities is coming. The surface decontamination is a prerequisite to D&D, which will make it easier and reduce the volume of radioactive wastes. However, there are no comprehensive studies on the decontamination methods, which is not helpful for the sustainable development of nuclear energy and environment protection. Therefore, in this work, the current status and future trends of global energy and nuclear energy are first analyzed. Then, various decontamination approaches are comparatively studied, including cleaning mechanisms, application subjects, and intrinsic advantages and disadvantages. Finally, the criteria and factors for selecting a decontamination process, the challenges, and future studies are directed. Among the mechanical methods, laser-based cleaning is high-speed, having automation ability, and thus is promising, although it creates a dust and airborne contaminant hazard. In further studies, factors such as selecting a proper laser facility, optimizing operating parameters, and designing a high-efficiency dust collection system could be studied. Regarding the chemical method, chemical gels are good for decontaminating complex shapes and vertical and overhead surfaces. In addition, they can enhance other decon agents’ efficiency by improving contact time. However, the formulation of colloidal gels is complex and no gel type is useful for all contaminants. Therefore, novel and versatile gels need be developed to enlarge their application field. Combining various decontamination methods will often have better results and thus a reasonable and effective combination of these decontamination methods has become the main direction.

Numerical Simulation and Experiments Study on Laser Ablation Decontamination for Strontium and Cesium from Contaminated 316L Stainless Steels in Spent Nuclear Fuel Reprocessing

An Efficient Laser Decontamination Process Based on Non-Radioactive Specimens of Nuclear Power Materials

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Development of a Multi-technique Characterization Portfolio for Stainless Steels Exposed to Magnox Reprocessing Liquors

Removal Characteristics of Ni-Ferrite Oxide Film Formed on the Stainless Steel Surface in Fiber Laser Decontamination

Investigation of aerosol generation through laser cleaning of various surfaces and optimization of mist & spray scavenging

Molten salts for efficient removal of radioactive contaminants from stainless steel surface: Mechanisms and applications

Laser surface cleaning of simulated radioactive contaminants in various technological environments

Strontium and cesium contamination behavior on Q235b carbon steel of radioactive liquid waste tank in alkaline environment

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Laser Decontamination of a Fuel-Element Surface from Uranium-Plutonium Fuel Particles

A State-of-the-Art Review of Radioactive Decontamination Technologies: Facing the Upcoming Wave of Decommissioning and Dismantling of Nuclear Facilities

Safety Verification of Femtosecond Laser Cutting of Tungsten Alloys During the Dismantling of Decommissioned Energetic Materials

Mechanistic understanding of the localized corrosion behavior of laser powder bed fused 316L stainless steel in pressurized water reactor primary water

Interaction of CsOH with structural steel 316L and simulated products of the steel-cladding reaction under assumed conditions relevant for the accident at the Fukushima Dai-Ichi Unit 2 and 3

Experimental study on laser cutting process of simulated fast Reactor fuel rods

Feasibility Study on Aluminum Under Laser Ablation for Corrosion Resistance in Molten Salt

Laser cutting study of zirconium alloys for nuclear decommissioning

Effect of Microstructure and Dislocation Density on Material Removal and Surface Finish of Laser Powder Bed Fusion 316L Stainless Steel Subject to a Self-Terminating Etching Process

Effects of Laser Shock Processing on Morphologies and Mechanical Properties of ANSI 304 Stainless Steel Weldments Subjected to Cavitation Erosion

Reconstruction Mechanism of Surface Integrity for Laser Additive Manufactured 316 L Stainless Steel Subjected to Ultrasonic Surface Rolling Process: Numerical Simulation and Experimental Verification