Abstract:AlxNb0.5TiV2Zr0.5 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) refractory high entropy alloys were prepared by vacuum arc melting to obtain a lightweight REHA with excellent microstructure and mechanical properties. The microstructure, density, hardness, and compressive properties at room and elevated temperatures of AlxNb0.5TiV2Zr0.5 alloys were investigated. All AlxNb0.5TiV2Zr0.5 alloys are composed of the BCC phase and the C14-Laves phase, and the volume fraction of the Laves phase raises from 12.03% to 22.83% and then decreases slightly to 20.31% with the increase of Al content. The density of AlxNb0.5TiV2Zr0.5 alloys decreases with the increase of Al content from 6.12 g/cm3 to 5.43 g/cm3, and the microhardness increases from 397.2 HV to 641.9 HV. At room temperature, the yield strength of AlxNb0.5TiV2Zr0.5 alloys increases obviously at first and then decreases slightly with the range of 843 MPa–1727 MPa. The compressive strain of the alloys obviously decreases from 33.4% to 13.7% at first and then increases to 16.6%. Upon increasing the temperature to 873 and 1073 K, the strength of all alloys decreases, and the yield strength of the Al0.8 alloy remains 1569 and 1108 MPa, respectively. The compression ratios of all AlxNb0.5TiV2Zr0.5 alloys reach 50% without fracture at this temperature. The specific yield strength of Al0.8 alloy acheives 312 × 103, 284 × 103, and 199 × 103 MPa·cm3g-1 at 298, 873, and 1073 K, which is superior to that of other alloys. A strong correlation between the mechanical properties and the Al content of AlxNb0.5TiV2Zr0.5 alloys is observed. Al is one of the elements that can promote the formation of the Laves phase, and the volume fraction of the Laves phase increases with the increasing Al content. As a hard intermetallic compound phase, the mechanical properties of the alloys are improved with the increasing volume fraction of the Laves phase.

Microstructure and Mechanical Properties of Alx(TiZrTa0.7NbMo) Refractory High-Entropy Alloys

Microstructure and elevated-temperature mechanical properties of refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy fabricated by powder metallurgy

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Effect of Al on microstructure and mechanical properties of lightweight AlxNb0.5TiV2Zr0.5 refractory high entropy alloys

Microstructure and Mechanical Properties of Refractory MoNbHfZrTi High-Entropy Alloy

Microstructural Evolutions and Mechanical Properties of Energetic Al1 (TiZrNbTaMoCr)15 High-Entropy Alloys

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

Strength-ductility Synergy of Al-bearing Low-Density Refractory TiNbMo0.5AlX Medium Entropy Alloys Via Precipitation

Microstructure Characteristics and Mechanical Properties of Hf0.5Mo0.5NbTiZr Refractory High Entropy Alloy with Cr Addition

Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Microstructural Evolution and Mechanical Behavior of Novel TiZrTaxNbMo Refractory High-Entropy Alloys

Design crystallographic ordering in NbTa 0.5 TiAl x refractory high entropy alloys with strength-plasticity synergy

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

Enhanced Mechanical Properties of HfMoTaTiZr and HfMoNbTaTiZr Refractory High-Entropy Alloys

Microstructure and Mechanical Properties of TaNbVTiAlx Refractory High-Entropy Alloys

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Microstructure and mechanical properties of multi-phase reinforced Hf-Mo-Nb-Ti-Zr refractory high-entropy alloys

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

Microstructure and Mechanical Properties of the Ti62Nb12Mo12Ta12W2 Refractory High Entropy Alloy Prepared through Spark Plasma Sintering