Abstract:In this work, a low-noise and high-rate front-end readout application-specific integrated circuit (ASIC) named SECALROC2 for the electromagnetic calorimeter (ECAL) in the super tau-charm factory (STCF) is presented. The chip is designed to process signals generated from avalanche photodiode detectors (APDs) for both energy and time measurement. The large detector capacitance and leakage current of the APD pose a great challenge to the noise and speed performance of the front-end readout circuit (ROC). A low-noise preamplifier and a fifth-order high-linearity shaper with adjustable peaking times are proposed to decrease noise induced by the 270-pF detector capacitance. A peak detect-and-hold circuit and a high-linearity differential analog buffer are adopted to convert each peak voltage of the shaper to differential voltages with sufficient driving capability. A fast shaper and a discriminator are implemented to produce trigger signals for the time of arrival (TOA) measurement. To reduce the complexity and power consumption of the ECAL system, a 12-bit 10-MS/s pipelined analog-to-digital converter (ADC) and a 16-bit three-stage time-to-digital converter (TDC) with 42-ps bin size TDC are integrated on-chip for full-digitalized outputs. This ASIC was designed and fabricated in a standard commercial 1P6M 0.18-mu m mixed-signal CMOS process and the chip area occupancy is 2.4 x 1.6 mm(2). The experimental results show that the input charge of the ASIC ranges from 3.2 to 400 fC. The measured nonlinear error of the system is less than 2.5% with an event rate up to 400 kcps. The equivalent noise charge (ENC) is 1367 e(-) + 4.93 e(-)/pF at 800-ns peaking time. The timing resolution is better than 540 ps at an input charge of 160 fC. The measured ENC can achieve 3820 e(-) when the ASIC is connected to an APD detector. The effective number of bits (ENOB) of the ADC is 10.8-bit when operated at 10 MS/s.

Prototype of a Readout Control ASIC for Data Collection and Command Distribution

Design and Performance of a 16-Channel Radiation-Hardened Low-Noise Front-End Readout ASIC for CZT-based Hard X-ray Imager

Design and preliminary performance of a novel mixed-signal front-end electronics with post digital shaping for CZT detectors

SECALROC2: A Low-Noise, High-Speed, and Full Digital Outputs Front-End ASIC for STCF Electromagnetic Calorimeter With APD Detectors

Design of a Pixel Readout ASIC Using Super Pixel Circuits with a Built-in LDO Regulator for Hybrid X-ray Imaging Detectors

Design and Characteristics of a Multichannel Front-End ASIC Using Current-Mode CSA for Small-Animal PET Imaging.

Design and Development of a Front-End Readout ASIC for APD-Based STCF Electromagnetic Calorimeter

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

Design and Testing of a 0.8 V Low-voltage High-rate Prototype Readout ASIC for the Micro-Pattern Gas Detector

A Novel Front-End ASIC with Post Digital Filtering and Calibration for CZT-based PET Detector

Data Acquisition System for CEPC Vertex Detector Prototype

A Distributed Readout Network ASIC for High-Density Electrode Array Targeting at Neutrinoless Double-Beta Decay Search in a Time Projection Chamber

Front-end Electronics and Data Acquisition System for Imaging Atmospheric Cherenkov Telescopes

CMOS MAPS with a Novel Readout Scheme for High Luminosity Particle Colliders

Development of a Low Power and High Integration Readout ASIC for Time Projection Chambers in 65 Nm CMOS

A Prototype of an ATCA-Based System for Readout Electronics in Particle and Nuclear Physics

IMOTEPAD: A mixed-signal 64-channel front-end ASIC for small-animal PET imaging

Developement of readout ASIC for FPCCD vertex detector

A Mixed-Signal Micromegas Readout ASIC Prototype With Automatic Charge Measurement Range Calibration

Development of a compact radiation-hardened low-noise front-end readout ASIC for CZT-based hard X-ray imager

Development of a Pixel Readout ASIC for CZT Detectors for Spectral X-ray Photon-Counting Imaging Applications