Abstract:Multispectral thermometry is based on the law of blackbody radiation and is widely used in engineering practice today. Temperature values can be inferred from radiation intensity and multiple sets of wavelengths. Multispectral thermometry eliminates the requirements for single-spectral and spectral similarity, which are associated with two-colour thermometry. In the process of multispectral temperature inversion, the solution of spectral emissivity and multispectral data processing can be seen as the keys to accurate thermometry. At present, spectral emissivity is most commonly estimated using assumption models. When an assumption model closely matches an actual situation, the inversion of the temperature and the accuracy of spectral emissivity are both very high; however, when the two are not closely matched, the inversion result is very different from the actual situation. Assumption models of spectral emissivity exhibit drawbacks when used for thermometry of a complex material, or any material whose properties dynamically change during a combustion process. To address the above problems, in the present study, we developed a multispectral thermometry method based on optimisation ideas. This method involves analysing connections between measured temperatures of each channel in a multispectral temperature inversion process; it also makes use of correlations between multispectral signals at different temperatures. In short, we established a multivariate temperature difference correlation function based on the principles of multispectral radiometric thermometry, using information correlations between data for each channel in a temperature inversion process. We then established a high-precision thermometry model by optimising the correlation function and correcting any measurement errors. This method simplifies the modelling process so that it becomes an optimisation problem of the temperature difference function. This also removes the need to assume the relationships between spectral emissivity and other physical quantities, simplifying the process of multispectral thermometry. Finally, this involves correction of the spectral data so that any impact of measurement error on the thermometry is reduced. In order to verify the feasibility and reliability of the method, a simple eight-channel multispectral thermometry device was used for experimental validation, in which the temperature emitted from a blackbody furnace was identified as the standard value. In addition, spectral data from the 468–603 nm band were calibrated within a temperature range of 1923.15–2273.15 K, resulting in multispectral thermometry based on optimisation principles with an error rate of around 0.3% and a temperature calculation time of less than 3 s. The achieved level of inversion accuracy was better than that obtained using either a secondary measurement method (SMM) or a neural network method, and the calculation speed achieved was considerably faster than that obtained using the SMM method.

A Probabilistic Neural Network Measurement Method for Multispectral High Dynamic Temperature

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Wavelet Convolutional Neural Network for Robust and Fast Temperature Measurements in Brillouin Optical Time Domain Reflectometry.

Multi-parameter Online Measurement IoT System Based on BP Neural Network Algorithm.

Convolutional neural network-based image denoising for synchronous measurement of temperature and deformation at elevated temperature

A Convolutional Neural Network and Attention-Based Retrieval of Temperature Profile for a Satellite Hyperspectral Microwave Sensor

A Soft Calibration Technique for Infrared Imaging Based on Physical Model of Thermal Radiation and Variational Bayesian Inference from Small Dataset

Non-scanning Wide Range Multi-Wavelength Imaging Temperature Measurement Technology

Multimode fiber image reconstruction based on parallel neural network with small training set under wide temperature variations

Multispectral Thermometry Method Based on Optimisation Ideas

Multispectral High Temperature Thermography

ANN-Assisted High-Resolution and Large Dynamic Range Temperature Sensor Based on Simultaneous Microwave Photonic and Optical Measurements

Artificial Neural Network Compensation for an Optical Fiber Temperature Sensing System Based on Optical Time Offset

Visible and Near-Infrared, Multiparametric, Ultrasensitive Nanothermometer Based on Dual-Emission Colloidal Quantum Dots

Probabilistic Neural Networks for Ensemble Postprocessing

Machine-Learning-Based Calibration of Temperature Sensors

Using Recurrent Neural Networks to Reconstruct Temperatures from Simulated Fluorescent Data for use in Bio-Microfluidics

Neural network-based reconstruction of steady-state temperature systems with unknown material composition

Amalgamation of Geometry Structure, Meteorological and Thermophysical Parameters for Intelligent Prediction of Temperature Fields in 3D Scenes

A Multi-Spectral Temperature Field Reconstruction Technology under a Sparse Projection

Simultaneous Estimation of Land Surface and Atmospheric Parameters From Thermal Hyperspectral Data Using a LSTM-CNN Combined Deep Neural Network