Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design of Ultra-Broadband 3-Db 90° Directional Coupler

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

A High-Precision Ultra-Broadband Quadrature Generation at Millimeter-Wave Frequencies

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Design and Implementation of Broadband Hybrid 3-dB Couplers with Silicon-Based IPD Technology

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Compact UWB directional coupler with one notch-band

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

UWB, compact, dual‐polarized antenna designed by tightly coupling technology

Design of high-power small-size directional coupler

An asymmetric non-uniform 3-dB directional coupler with 300-nm bandwidth

A Lumped-Element Directional Coupler for Bandwidth Enhancement, Impedance Matching, and Harmonic Suppressions

Design and Analysis of High-power Third-order 3 dB Directional Coupler

Coupling tunable D-band directional coupler for millimeter-wave applications

A Compact Circular Waveguide Directional Coupler for High-Order Mode Vacuum Electronic Devices

High-Performance 2 × 2 Bent Directional Couplers Designed with an Efficient Semi-Inverse Design Method