Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Improved Dynamic Recrystallization Modeling in the High-Speed Machining of Titanium Alloy

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Multiscale Simulation of Grain Refinement Induced by Dynamic Recrystallization of Ti6Al4V Alloy During High Speed Machining

Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations

Microstructure alteration in the high-speed machining of titanium alloy involved with tool wear and cryogenic condition

Deformation Mode Dependent Mechanism and Kinetics of Dynamic Recrystallization in Hot Working of Titanium Alloy

Grain Refinement Mechanism under High Strain-Rate Deformation in Machined Surface During High Speed Machining Ti6Al4V

Dynamic recrystallization of Ti-6Al-4V titanium alloy based on cellular automata

The Role of Dynamic and Post Dynamic Recrystallization on Microstructure Refinement in Primary Working of a Coarse Grained Two-Phase Titanium Alloy

Modeling of Plastic Deformation Induced by Thermo-Mechanical Stresses Considering Tool Flank Wear in High-Speed Machining Ti-6Al-4V

Construction of a Predictive Model for Dynamic and Static Recrystallization Kinetics of Cast TC21 Titanium Alloy

Investigation of the Grain Refinement Mechanism in Machining Ti-6Al-4V: Experiments and Simulations

Finite Element and Experimental Analysis of Grain Refinement Caused by Dynamic Recrystallization During High-Speed Cutting of Nickel-Based Superalloys

Molecular dynamics simulation for temperature assisted machining of a polycrystalline γ-TiAl alloy

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

A Modified Constitutive Model Coupled with Microstructure Evolution Incremental Model for Machining of Titanium Alloy Ti–6Al–4V

The Hardening Effect of Deformation Twinning Based on Visco-Plastic Self Consistent Model and a Multi-Scale Grain Refinement Prediction Model During Machining of Titanium Alloy

Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining

Simulation of Mechanical Response in Machining of Ti-6Al-4V Based on Finite Element Model and Visco-Plastic Self-Consistent Model

Dynamic Recrystallization Behavior and Model Study of Equiaxed Fine Grain Structure TC4

Grain Refinement Mechanism in Chip and the Machined Subsurface During High-Speed Machining of Inconel 718 Alloy