Abstract:When hot and cold fluids are mixed at pipeline tees, temperature fluctuations are generated and can lead to thermal fatigue damage in the piping materials. At the University of Stuttgart in Germany, experimental investigations have been performed for understanding the flow mixing mechanism causing thermal fatigue. It was found that the inlet flow rate is one of the decisive factors on the mixing behaviors at a horizontal T-junction. In this study, the influence of the inlet flow rate on the flow mixing behaviors at the vertical T-junction is investigated using the large-eddy simulation (LES) method. The simulations are validated with the previous experiments and provide a good overview of the mixing flow. The LES method shows the advantage of illustrating the collision of two flow streams at the T-junction, which leads to different behaviors of the mixing flow. Generally, the temperature fluctuation in the mixing flow as well as the stability of thermal stratification decreases along the flow direction due to the dissipation of the turbulent kinetic energy in the mixing flow. The decrease in the main flow rate shows the impact of the increase in thermal stratification stability and the reverse flow distance. The decrease in the branch flow leads to a slight increase of the thermal stratification stability downstream of the T-junction and significant turbulent penetration in the branch pipe. The maximum temperature fluctuation at the pipeline inner surface is located at the joint position of the pipelines with a value higher than 30 K. Moreover, the flow collision at the T-junction leads to significant secondary flow in the mixing region, which can be influenced by the variations in the inlet flow rate. In particular, the secondary flow due to cold fluid presents a phenomenon of counter-rotating vortex pair (CRVP), and generates a temperature fluctuation with a frequency of approximately 1.1 Hz, which is recorded by the monitor points at both horizontal sides of the pipeline. In comparison with the previous work at the horizontal T-junction, the complete flow collision at the vertical T-junction is the reason for the totally different mixing phenomenon.

Study on Targeted Influence of Annular Porous Media and Rotating Impeller on Thermal Mixing in T-Junctions

Numerical Investigation on Hydrodynamics and Heat Transfer of Highly Viscous Fluid in Sulzer Mixer Reactor

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Numerical Simulation of the Mixing Behaviour of Hot and Cold Fluids in the Rectangular T-junction With/without an Impeller

Experimental Observations of Thermal Mixing Characteristics in T-Junction Piping

Experiment Research on Thermal Mixing in Horizontal T-Junction: In-Pipe Temperature and Flow Characteristic Research

Numerical investigation of thermal-mixing characteristics at vertically oriented T-junction pipelines

Investigating Thermal Mixing and Reverse Flow Characteristics in A T-Junction by Way of Experiments

Experimentally Investigating the Thermal Mixing and Thermal Stripping Characteristics in A T-Junction

Experimental study on the flow mixing in T-junctions with an impeller

Investigating Thermal Mixing and Reverse Flow Characteristics in a T-junction Using CFD Methodology

Measuring Method of Inner Wall Temperature Fluctuations for Thermal Fatigue in T-junction Pipe

Numerical investigation of mixing performance for a helical tangential porous tube-in-tube microchannel reactor

Numerical Simulation of Non-isothermal Jetinto Crossflow for T-junction Pipe with Thick Wall

Study on the Flow Mixing of Hot and Cold Fluids in the T-Junction under Rolling Motion Condition

Controlling gas–liquid flow and enhancing heat transfer in a T-junction microchannel by wettability-engineered walls

Numerical Research on Thermal Mixing Characteristics in a 45-Degree T-junction for Two-Phase Stratified Flow During the Emergency Core Cooling Safety Injection

Mechanism and experimental study of thermal mixing of fluid with different temperature

Study on the Coolant Mixing Phenomenon in a 45° T Junction Based on the Thermal-Mechanical Coupling Method

Experimental Study about Mixing Characteristic and Enhancement of T-jet Reactor

Mixing in the Confined Vortical Flow in Non-Aligned T-jets Reactors