Abstract:In the process of production logging to evaluate fluid flow inside pipe, logging tools that force all flow to pass through a small measuring pipe are commonly utilized for measuring mixture density. For these logging tools, studying the fluid flow phenomenon inside the small diameter pipe and improving the prediction accuracy of pressure drop are beneficial to accurately measure mixture density. In this paper, a pressure drop prediction system is designed based on a combination of an eight-electrode rotating electric field conductance sensor (REFCS), plug-in cross-correlation conductance sensor, and differential pressure sensor. This combination overcomes the limitation of the existing pressure drop prediction model that the inlet flow velocity needs to be known. An experiment is conducted in a flow loop facility with 20 mm inner diameter small pipe. The responses of the combination sensors are collected. The REFCS is used to identify flow pattern and measure water holdup. During which five flow patterns are identified by recurrence plot method, i.e., slug flow, bubble flow, churn flow, bubble-slug transitional flow, and slug-churn transitional flow. The mixture velocity of two-phase flow is determined by the plug-in conductance sensor. The differential pressure sensor provides a differential pressure fluctuation signal. Five models of prediction of pressure drop are evaluated. The mixture friction factor of gas-water two-phase flow is obtained by a fitting method based on the measured parameters and flow pattern identification using the optimal model. Then, the pressure drop can be predicted according to the measurement results of a conductance sensor and fitting relationship. The results of pressure drop prediction show that the model proposed by Ansari et al. presents a higher accuracy compared with the other four differential pressure models with the absolute average percentage deviation (AAPD) of less than 2.632%. Moreover, the accuracy of pressure drop prediction of the Zhang et al. model is improved by using the mixture friction factor.

Design of Desktop Gas Small Flow Measurement Device Based on Flow Compensation Method

Development of a Gas Flow Sensor Based on FS5 Hot-Film Probe

A Device and Method For Flowrate Measurement of Fluid in Small Channel Based on C~4D Technique

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

Parameter Measurement System of Taylor Flow in Small Channels Based on Photodiode Array Sensors.

Gas Flow Calibration Standard Device for Working Site

Development of a Measurement Device for Micro Gas Flowrate Based on Laminar Flow Element with Micro-Curved Surface

Liquid Dynamic Mass Flow Controller

Psychosocial adjustment 17 years after severe brain injury

Study on new gas flow sensor based on hot-film probe

Automatic Piston-Type Flow Standard Device Calibration System

Conductance Sensor With Self-Calibration and Venturi Tube Based Flowrate Measurement for Gas–Water Slug Flow

Data Integration for Multi-Path Ultrasonic Flowmeter Based on Levenberg–Marquardt Algorithm

Numerical Simulation and Experimental Research on Measurement Characteristics of Elbow Meter

Development and Application of Multi-Component Dynamic Gas Distribution Instrument Based on Mass Flow Controller

Research on unsteady flow measurement standard device based on active piston

A Small Flow Point Signal Processing and Measurement Method for Ultrasonic Gas Meter

A study of mass flow rate measurement based on the vortex shedding principle

Oil-Gas-Water Three-Phase Flow Measurement Based on the Theory of Partial Separation

The Design and Realization of Automatic Printing and Dyeing Auxiliary Distribution System with Flow Method

A Differential Pressure Sensor Coupled with Conductance Sensors to Evaluate Pressure Drop Prediction Models of Gas-Water Two-Phase Flow in a Vertical Small Pipe