Abstract:Flow measurement is one of the mostly measured physical quantities in industry. It is of great economic importance. Pressure losses by measuring devices must be avoided and measurement errors should be as small as possible. These conditions are fulfilled with ultrasonic gas flow meter. The problem up to now was the difficult signal processing of the complex modulated ultrasonic signals. Two types of flow meter by means of ultrasound, cross correlation meter and vortex flow meter respectively, are thoroughly researched in this work. The signal processing is based on the interaction between ultrasound and turbulences, from which the ultrasound is modulated both in phase and amplitude. Analytic signal is used to model the complex modulation based on which the Hilbert Transform is introduced. The reconstructed signals through software Hilbert Transform not only keep a good result dealing with phase modulation part but also yield fairly good results when dealing with amplitude modulation part in cross correlation measurement. It is believed that the applitude modulation signal is not applicable for measurement, which is a conclusion drawn in the case of the common Quadrature Amplitude Demodulation(QAD). Demodulation is traditionally carried out by QAD. Extended Kalman Filter is applied to make demodulation in this dissertation. It is not only used in phase but also amplitude demodulation. This method, taking advantage of the same information required by using QAD, yields better demodulation results with less noise and overcomes the disadvantages such as phase jumping at high velocities using QAD. The combination of cross correlation method with vortex method forms a self-monitoring system and overcomes the systematic error of pure cross correlation method resulting in less uncertainty and higher reliability. Inclination of bluff body in vortex flow measurement is investigated and the measurement in disturbed flow is also initially studied.

A Small Flow Point Signal Processing and Measurement Method for Ultrasonic Gas Meter

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

A Method to Avoid the Cycle-Skip Phenomenon in Time-of-flight Determination for Ultrasonic Flow Measurement

Design of a High Precision Ultrasonic Gas Flowmeter

New Contactless Velocity Measurement Sensor for Bubble/Slug Flow in Small Scale Pipes.

A New Contactless Bubble/Slug Velocity Measurement Method of Gas–Liquid Two-Phase Flow in Small Channels

A Method for Void Fraction Measurement of Bubble/slug Flow in Small Channels Based on Contactless Impedance Detection

Similarity Judgment-Based Double-Threshold Method for Time-of-Flight Determination in an Ultrasonic Gas Flowmeter

A New Type Of Ultrasonic Gas Flowmeter With Multi-Tracks

Signal processing and improvement measures for ultrasonic gas flowmeter based on DSP

Time Delay Study of Ultrasonic Gas Flowmeters Based on VMD–Hilbert Spectrum and Cross-Correlation

Double Threshold Ultrasonic Distance Measurement Technique and Its Application

Multipath Ultrasonic Gas Flow-Meter Based on Multiple Reference Waves

Realization of a Multipath Ultrasonic Gas Flowmeter Based on Transit-Time Technique.

Signal processing and experimental technology in ultrasonic flow measurement

Design of ultrasonic flowmeter for wet gas measurement

Flight Time Measurement Methodology for Small-Caliber Clamp-on Ultrasonic Flowmeters

Numerical Analysis of Transducer Installation Effect on Ultrasonic Gas Flow Meter

A Gas Flow Measurement System Based on Lead Zirconate Titanate Piezoelectric Micromachined Ultrasonic Transducer

A Fault-Tolerant Flow Measuring Method Based on PSO-SVM with Transit-Time Multipath Ultrasonic Gas Flowmeters

Data Integration for Multi-Path Ultrasonic Flowmeter Based on Levenberg–Marquardt Algorithm