Abstract:Cement solidification is essential to reduce heavy metal leaching from industrial sludge and make it recyclable. This paper studied the effect of aggregate grading optimized by sludge containing heavy metal of different particle sizes on the performance of baking-free sludge bricks, which was mixed with industrial sludge cured by both micro-silica fume and cement. First, the gradation of fine natural aggregates was adjusted according to the Fuller curve. Fine aggregates in baking-free bricks were replaced by artificially processed sludge with particle sizes of 0.15 mm ~0.3 mm and 2.36 mm ~4.75 mm. In this case, a mixed proportion scheme was designed. Then, the strength, water absorption, porosity, and heavy metal leaching were measured. With the help of nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM), the phase and pore structures were observed. The test results showed that: (1) Sludge can replace part of the fine aggregates to make baking-free bricks, resulting in the reduction of the strength of baking-free bricks, but the strength still meets the standard strength requirements of GB/T 21,144-2007. (2) When fine aggregates are partly replaced by sludge with finer particle sizes, baking-free sludge bricks exhibit higher strength, lower water absorption, better pore structures and microphase structure, and stronger solidification of heavy metals, the leaching number of heavy metals meets the standard requirements of GB5085.3-2007, which will be provided support for actual industrial production.Implications: Cement solidification is an essential means to reduce the heavy metal leaching from industrial sludge and make it recyclable. This paper studied sludge containing heavy metal of different particle sizes on the performance of baking-free sludge bricks. This paper analyzed the compressive strength, porosity and water absorption of baking-free bricks mixed with sludge of different partical sizes, and adopted the NMR to characterize the pores of baking-free bricks, and the SEM to observe the baking-free bricks resultants and the interfacial transition zone (ITZ). The heavy metal leaching test verified the environmental benefits of baking-free bricks mixed with sludge instead of aggregates. There not only make full use of solid wastes, but also thus minimizing pollution to the environment, which provide support for actual industrial production and a reference for studying industrial sludge recycling technology.

Preparation of Sintered Brick from Thermal Desorption Residue of Oily Sludge and Analysis of Environmental Performance

Preparation, characteristics and mechanisms of the composite sintered bricks produced from shale, sewage sludge, coal gangue powder and iron ore tailings

Research on the Synthesis of Sintered Bricks Using River Sludge for the Resource Utilization

Preparation of Sintered Brick with Aluminum Dross and Optimization of Process Parameters

Eco-efficient reuse of alum-based water treatment sludge into structural sintering bricks

Recycling of sewage sludge in clay-free thermal insulation brick: assessment of microstructure, performance, and environment impact

Using water-based drilling cuttings from shale gas development to manufacture sintered bricks: a case study in the southern Sichuan Basin, China

Investigation of the emission and leaching behavior of characteristic heavy metals in sintered bricks prepared from oil-based drill cutting residues

Preparation and Mechanism of the Sintered Bricks Produced from Yellow River Silt and Red Mud.

Utilization of river sediment, sewage sludge and wheat straw as the primary raw material in sintered-shale bricks

Study on preparation of brick blocks by using construction waste and sludge

Effect of industrial sludge particle size on the performance of baking-free sludge bricks

Resource Utilization of the Dredged Material of Urban river to Manufacture Sintered Brick

The reuse of waste glass to enhance strength during the introduction of municipal sewage sludge in shale brick manufacturing

Lightweight bricks manufactured from ground soil, textile sludge, and coal ash

Potential Use of Water Treatment Sludge as Partial Replacement for Clay in Eco-Friendly Fired Clay Bricks

Preparation and characterization of majority solid waste based eco-unburned permeable bricks

Developing fired clay bricks by incorporating scrap incinerated waste and river dredged sediment

Utilizing Industrial Sludge Ash in Brick Manufacturing and Quality Improvement

Utilization of Sandy Soil as the Primary Raw Material in Production of Unfired Bricks

Effect of Sewage Sludge Addition on Microstructure and Mechanical Properties of Kaolin-Sewage Sludge Ceramic Bricks