Abstract:In this article, a novel waveguide-to-microstrip transition with a built-in dc/IF return path is proposed, in which a traditional E- plane probe is directly connected to the backshort by a thin metal wire along the axis of the waveguide. The proposed waveguide-to-microstrip transition implements an additional dc/IF return path while realizing mode conversion. Moreover, the presence of the dc/IF return path has little influence on the performance of the original E- plane probe. The operating principle is analyzed by theoretical analysis and full-wave simulation, and the design procedure of the transition is also presented. To implement the proposed dc/IF return path on different substrates, two approaches, including direct integration with planar circuits or with wire bonding technology, are developed. Furthermore, two back-to-back transition prototypes working in the millimeter and submillimeter bands were designed and characterized. The measured results are in excellent agreement with the simulations. Finally, as an application example, a 70-/140-GHz unbalanced frequency doubler adopting this structure for both dc biasing and dc grounding was designed and fabricated. Measured results show that the conversion loss of the fabricated doubler is less than 13 dB in the range from 125 to 145 GHz, and the minimum conversion loss is 11 dB at 140 GHz with 100-mW input power.

Novel Magic-T Integrated with Rectangular Waveguide-to-Microstrip Line Transition

Novel Millimeter‐wave Vertical Transition Between Rectangular Waveguide and Balanced Transmission Line Using Embedded Magnetic Closed Loops

A 3-D Printed $E$ -Plane Waveguide Magic-T Using Air-Filled Coax-to-Waveguide Transitions

Improved circuit model for coplanar-waveguide to microstrip-line transition on silicon substrate

A Novel Ka-Band Planar Magic-T Used As Wilkinson Power Divider

A Sub-THz Waveguide Magic-T with Coplanar Ports for Power Combination Applications

Magnetic-Coupling Based Waveguide-to-Microstrip Transition

A Novel Low Profile Rectangle Waveguide Planar Magic-T of Ka-band

A Novel Millimeter-Wave Rectangular Waveguide-Microstrip Transition Based on the Principle of Magnetic Field Coupling

Design of High Isolated Ka Band Planar Magic-T

A Broadband Ka-Band Waveguide Magic-T with Compact Inner Ridge Matching

A rectangular waveguide-microstrip transition based on the principle of magnetic coupling for millimeter-wave

A Ka Band Microstrip To Waveguide Transition Using A Quasi-Triangle Probe

A Novel Waveguide-to-Coaxial Transition with Embedded Magnetic Closed Loop

An 18–40 GHz Ridge Waveguide Magic-T Using Stepped Conducting T-Junction Transition

Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path

Integrated microstrip and rectangular waveguide in planar form

A Full Ka-Band Microstrip-to-waveguide Transition Using Tapered CPS Probe and V-antenna

A Novel Hybrid Planar SIW Magic Tee and Monopulse Antenna

Novel Wideband Transition Between Coplanar Waveguide and Microstrip Line

Wideband In-Line Waveguide-to-Microstrip Transition with Antisymmetric Rectangular Probes