Abstract:In this article, a novel waveguide-to-microstrip transition with a built-in dc/IF return path is proposed, in which a traditional E- plane probe is directly connected to the backshort by a thin metal wire along the axis of the waveguide. The proposed waveguide-to-microstrip transition implements an additional dc/IF return path while realizing mode conversion. Moreover, the presence of the dc/IF return path has little influence on the performance of the original E- plane probe. The operating principle is analyzed by theoretical analysis and full-wave simulation, and the design procedure of the transition is also presented. To implement the proposed dc/IF return path on different substrates, two approaches, including direct integration with planar circuits or with wire bonding technology, are developed. Furthermore, two back-to-back transition prototypes working in the millimeter and submillimeter bands were designed and characterized. The measured results are in excellent agreement with the simulations. Finally, as an application example, a 70-/140-GHz unbalanced frequency doubler adopting this structure for both dc biasing and dc grounding was designed and fabricated. Measured results show that the conversion loss of the fabricated doubler is less than 13 dB in the range from 125 to 145 GHz, and the minimum conversion loss is 11 dB at 140 GHz with 100-mW input power.

A Full Ka-Band Microstrip-to-waveguide Transition Using Tapered CPS Probe and V-antenna

Full Ka Band Waveguide-to-Microstrip Inline Transition Design

A Ka Band Microstrip To Waveguide Transition Using A Quasi-Triangle Probe

A Full Ka-band Microstrip-to-waveguide Transition Using Side-Inserted Magnetic Coupling Semicircular Ring

Novel Ka-Band Waveguide——Microstrip Transition Structure

A Microstrip to Rectangular Waveguide Transition Using Coupling Loop in Millimeter-Wave Band

A rectangular waveguide-microstrip transition based on the principle of magnetic coupling for millimeter-wave

Wideband In-Line Waveguide-to-Microstrip Transition with Antisymmetric Rectangular Probes

A Broadband Microstrip-to-Waveguide End-Wall Probe Transition and Its Application in Waveguide Termination

Compact in-line waveguide-to-microstrip coaxial probe transition for millimeter-wave

Wideband Transition Between Rectangular Waveguide and Microstrip Using Asymmetric Fin Line Probe

A Novel Millimeter-Wave Rectangular Waveguide-Microstrip Transition Based on the Principle of Magnetic Field Coupling

Full Ka-Band Right-Angle Transition from Substrate Integrated Waveguide to Air-Filled Rectangular Waveguide

Ka-band Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe

Broadband Stripline to Rectangular Waveguide Transition

An In-Line Coaxial-to-circular Waveguide Transition at X Band

W‐band Inline Waveguide‐to‐coupled Microstrip Line Transition Using a Compact Differential Antenna

Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path

Novel Wideband Transition Between Coplanar Waveguide and Microstrip Line

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide