Abstract:A highly sensitive non-enzymatic glucose electrode based on truncated octahedral CuO-modified Cu2O@Cu composite was fabricated by a simple hydrothermal method combined with a two-step liquid-phase reduction process. Research on utilizing nanostructures to increase the contact opportunities between electroactive materials and target analytes, thereby enhancing electrocatalytic activity, is currently insufficient. In this study, we employed a reduction method to create a core-shell structure with copper shells encapsulating internal nanomaterials. This structure was designed to provide more active sites for glucose molecules, thereby enhancing the electrocatalytic response current of glucose. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the morphology and components of the products obtained from each step, while the CuO/Cu2O@Cu ternary composites were specifically analyzed using transmission electron microscopy (TEM). For glucose detection, CuO/Cu2O@Cu composite was modified onto a glassy carbon electrode (GCE) as a working electrode for electrochemical performance testing. The cyclic voltammetry (CV) test results indicate that the CuO/Cu2O@Cu-GCE electrode exhibits a sensitivity of 771 mu A cm(-2) mM(-1) within the glucose concentration range of 0 to 10 mM, with a detection limit of 3.39 mu M. Chronoamperometry (CA) results demonstrate that the electrode achieves a sensitivity of 1067 mu A cm(-2) mM(-1) in the glucose concentration range of 0 to 1 mM, with a detection limit of 0.56 mu M. Exhibiting a broad linear response range, high sensitivity, minimal detection limit, and robust selectivity against common interferents, the electrode maintained 99 % stability over four days and retained more than 85 % of its current response for two weeks, also showing notable sensitivity in artificial sweat samples. Owing to its simple fabrication, cost-effectiveness, and outstanding electrochemical properties, the CuO/Cu2O@Cu composite offers significant potential for application in non-enzymatic glucose sensing.

An Effective Non-Enzymatic Glucose Biosensor Based on Nanostructured Cu<sub>x</sub>O/Cu Electrodes Synthesized in Situ by Copper Anodization

An Effective Non‐Enzymatic Glucose Biosensor Based on Nanostructured Cu <sub>x</sub> O/Cu Electrodes Synthesized in Situ by Copper Anodization

An Effective Non-Enzymatic Glucose Biosensor Based on Nanostructured CuxO/Cu Electrodes Synthesized in Situ by Copper Anodization

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

An Electrochemical Nonenzymatic Microsensor Modified by CuCo2O4 Nanoparticles for Glucose Sensing

Facile Synthesis of Novel CuO/Cu2O Nanosheets on Copper Foil for High Sensitive Nonenzymatic Glucose Biosensor

Nanoporous CuZn supported CuO nanoparticle electrodes for non-enzymatic electrochemical glucose detection

A Non-Enzymatic Glucose Sensor Based on Copper Oxide Nanowires-Singlewall Carbon Nanotubes

In Situ Oxidation of Cu2O Crystal for Electrochemical Detection of Glucose

An Ultrasensitive Non-Enzymatic Glucose Sensors Based on Controlled Petal-Like CuO Nanostructure

A highly sensitive nonenzymatic glucose sensor based on CuO nanoparticles-modified carbon nanotube electrode.

A Novel Non-Enzymatic Glucose Sensor Based on Cu Nanoparticle Modified Graphene Sheets Electrode

A Vertically Aligned CuO Nanosheet Film Prepared by Electrochemical Conversion on Cu-based Metal-Organic Framework for Non-Enzymatic Glucose Sensors

A Highly Sensitive Non-Enzymatic Glucose Electrode Based on Truncated Octahedral CuO-modified Cu2O@Cu Composite

Exploiting Synergistic Interaction in Cu-Zn-Ni Alloy Oxide Films Prepared by One-Step Anodizing for a Highly Sensitive Non-Enzymatic Glucose Sensor

An improved sensitivity non-enzymatic glucose sensor based on a CuO nanowire modified Cu electrode.

3D CuO Nanosheet Wrapped Nanofilm Grown on Cu Foil for High-Performance Non-Enzymatic Glucose Biosensor Electrode

Fabrication of Nanoporous Copper Oxide Film Biosensor with a Polymer Sphere Template and Its Application to Glucose Sensing

Effect of Different Copper Sources on the Morphology of Cuprous Oxide and Its Application As a Non-Enzymatic Glucose Sensor

Controllable morphology engineering of Cu 2 O nanoparticles for non-enzymatic glucose sensing

Fabrication of CuO Nanosheets-Built Microtubes Via Kirkendall Effect for Non-Enzymatic Glucose Sensor