Abstract:In this report, a novel type of cupric oxide (CuO) nanoparticles-modified multi-walled carbon nanotubes (MWCNTs) array electrode for sensitive nonenzymatic glucose detection has been fabricated. The morphology of the nanocomposite was characterized by transmission electron microscopy and X-ray diffraction. The electrochemical performance of the CuO/MWCNTs electrode for detection of glucose was investigated by cyclic voltammetry and chronoamperometry. The CuO/MWCNTs electrode showed much higher electrocatalytic activity and lower overvoltage than the bare MWCNTs electrode towards oxidation of glucose. At an applied potential of +0.40V, the CuO/MWCNTs electrode presented a high sensitivity of 2596μAmM−1cm−2 to glucose. In addition, linear range was obtained over a concentration up to 1.2mM with a detection limit of 0.2μM (signal/noise=3). The response time is about 1s with addition of 0.10mM glucose. More importantly, the CuO/MWCNTs electrode is also highly resistant against poisoning by chloride ion, and the interference from the oxidation of common interfering species such as ascorbic acid, dopamine, uric acid and carbohydrate compounds is effectively avoided. In addition, the CuO/MWCNTs electrode was also used to analyze glucose concentration in human serum samples. The CuO/MWCNTs electrode exhibits an enhanced electrocatalytic property, low working potential, high sensitivity, excellent selectivity, good stability, and fast amperometric sensing towards oxidation of glucose, thus is promising for the future development of nonenzymatic glucose sensors.

In Situ Oxidation of Cu2O Crystal for Electrochemical Detection of Glucose

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

In Situ Growth of Self-Supported CuO Nanorods from Cu-MOFs for Glucose Sensing and Elucidation its Sensing Mechanism

An Effective Non-Enzymatic Glucose Biosensor Based on Nanostructured Cu<sub>x</sub>O/Cu Electrodes Synthesized in Situ by Copper Anodization

An Effective Non‐Enzymatic Glucose Biosensor Based on Nanostructured Cu <sub>x</sub> O/Cu Electrodes Synthesized in Situ by Copper Anodization

An Effective Non-Enzymatic Glucose Biosensor Based on Nanostructured CuxO/Cu Electrodes Synthesized in Situ by Copper Anodization

The dependence of Cu2O morphology on different surfactants and its application for non-enzymatic glucose detection

Controllable morphology engineering of Cu 2 O nanoparticles for non-enzymatic glucose sensing

A highly sensitive nonenzymatic glucose sensor based on CuO nanoparticles-modified carbon nanotube electrode.

CuO nanowires based sensitive and selective non-enzymatic glucose detection

One-step Rapid Preparation of CuO Nanosheets by High Frequency Induction Heating and the Application As Excellent Electrochemical Sensor Based on CuO/MWCNTs for the Detection of Glucose

An Electrochemical Nonenzymatic Microsensor Modified by CuCo2O4 Nanoparticles for Glucose Sensing

CuO-Ag2O nanoparticles grown on a AgCuZn alloy substrate in situ for use as a highly sensitive non-enzymatic glucose sensor

Cu2O nanowires with exposed {111} facet for nonenzymatic detection of glucose in complex biological fluids

Non-enzymatic glucose detection based on cuprous oxide thin film synthesized via electrochemical deposition

Electrocatalytic Oxidation of Glucose at a Copper Oxide Modified Carbon Ionic Liquid Electrode

Nanoporous CuZn supported CuO nanoparticle electrodes for non-enzymatic electrochemical glucose detection

Room-temperature and Gram-Scale Constructed Cu@CuO with Promoted Kinetics for Glucose Electrooxidation in the Faraday Process

In-situ synthesis of metasequoia-leaf-like Cu/Cu 2 O/Ni(OH) 2 on a glassy carbon electrode for efficient non-enzymatic glucose sensing

An improved sensitivity non-enzymatic glucose sensor based on a CuO nanowire modified Cu electrode.

An Ultrasensitive Non-Enzymatic Glucose Sensors Based on Controlled Petal-Like CuO Nanostructure