Laser Sintering of Cu Nanoparticles Deposited on Ceramic Substrates: Experiments and Modeling

Xiangyu Chen,Mengsen Zhang,Jianqin Zhu,Zhi Tao,Lu Qiu

DOI: https://doi.org/10.1016/j.addma.2023.103527

IF: 11

2023-01-01

Additive Manufacturing

Abstract:Laser sintering of micro/nano particles is a key technology widely used in additive manufacturing and flexible electronics. The mechanical or electrical performances of the fabricated devices are strongly depended on the sintering regime and the flow state of the melt pool determined by factors such as laser parameters, particle deposition pattern and substrate conditions. In contrast to the intensive research on laser parameters and deposition patterns, little attention has been paid to the effects of substrate materials, which would significantly influence the sintering condition due to the different heat transfer manner. Therefore, the present study investigates the laser sintering characteristics of Cu nanoparticles deposited on ceramic substrate. Four different laser sintering regimes can be determined for the specific thermal response of ceramics at different laser powers and scanning speeds. A modified energy density parameter, which could predict the thresholds of the regime transition, was proposed based on the diffusion and grain coarsening theory. With specific laser energy densities, the ceramic substrate absorbs the laser radiation and melts the adjacent nanoparticles, which may lead to a formation of stable internal melting layer that exhibits excellent densities and conductivities. A theoretical model based on the heat transfer analysis was also developed for the prediction of the internal molten layer thicknesses and the conductivity of the sintered circuit.