Abstract:The purpose of induction-heating-assisted ultrasonic surface rolling process is to introduce the temperature field into the ultrasonic surface strengthening process of materials and use the influence of heating temperature on the mechanical properties and microstructure of the material so that a surface-modified layer with improved performance can be obtained. Many studies on the ultrasonic surface rolling process have been conducted at room temperature. In this study, the effect of temperature on the surface integrity of carburised 18CrNiMo7-6 steel after ultrasonic surface rolling process was studied by induction heating. Compared with the result of ultrasonic surface rolling process at room temperature, below 250 °C, with the increase of heating temperature, the residual compressive stress and residual compressive stress depth of the sample increase continuously. The maximum surface residual compressive stress and residual compressive stress depth can be obtained at 250 °C, the surface residual compressive stress increases by 29%, and the residual compressive stress depth increases from 1700 to 2450 μm. The surface hardness of the sample also shows an increasing trend when the heating temperature is from 100 to 250 °C, and the hardness influence layer increases with the increase of heating temperature. The minimum surface roughness can be obtained by ultrasonic surface rolling process at 100 °C. In addition, the induction-heating-assisted ultrasonic surface rolling process parameters are optimised by grey correlation analysis method, and the optimum process parameters to achieve the best surface integrity are obtained as follows: static pressure of 400 N, rotation speed of 50 r/min, feed rate of 0.04 mm/r, and heating temperature of 250 °C. The order of significance of influence on surface integrity is static pressure >$$>$$ rotation speed >$$>$$ feed rate >$$>$$ heating temperature. The conclusion has a certain guiding significance for the anti-fatigue manufacturing of materials.

Surface Integrity and Tribological Behavior of 17cr2ni2movnb Steel under Combined Carburizing Treatment and Ultrasonic Rolling

Effect of Ultrasonic Surface Rolling on the Microstructure and Corrosion Properties of Gear Steel 20CrNiMo After Carburizing

Effect of ultrasonic surface rolling on the friction and wear properties of 8620H carburized steel at elevated temperatures

Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening

Rolling contact fatigue behaviors of 25CrNi2MoV steel combined treated by discrete laser surface hardening and ultrasonic surface rolling

Bending Fatigue Behaviour and Fatigue Endurance Limit Prediction of 20Cr2Ni4A Gear Steel after the Ultrasonic Surface Rolling Process

Improving the Wear Resistance of Heavy-Duty Gear Steels by Cyclic Carburizing

Surface integrity and rolling contact fatigue behavior of 18CrNiMo7-6 steel subjected to ultrasonic surface rolling process

Effect of microstructure on wear resistance during high temperature carburization heat treatment of heavy-duty gear steel

Surface nanocrystallized structural steel with enhanced tribological properties under different sliding conditions

Study on Fretting Wear Properties of GCr15 Steel Via Ultrasonic Surface Rolling Process

Carburization Induced Extra-Long Rolling Contact Fatigue Life of High Carbon Bearing Steel

Enhanced Wear Resistance of 20Cr2Ni4A Steel under Starved Lubrication Conditions via Ultrasonic Surface Burnishing Process

Effect of Post-Plasma Nitrocarburized Treatment on Mechanical Properties of Carburized and Quenched 18Cr2Ni4WA Steel

Microstructure and tribological performances of M50 bearing steel processed by ultrasonic surface rolling

Effects of ultrasonic surface rolling process on tribological behavior of 4Cr13 stainless steel

Effect of ultrasonic surface rolling process by disparate static pressure on a carburized layer of 17CrNiMo6 steel

The influence of ultrasonic surface rolling on the fatigue and wear properties of 23-8N engine valve steel

Investigation on surface integrity and process parameter optimisation of carburised 18CrNiMo7-6 steel by induction-heating-assisted ultrasonic surface rolling process

Performance of a Carburizing Bearing Steel After Surface Nanosized

Enhanced surface properties and contact fatigue performance of Cr4Mo4V bearing steel subjected to ultrasonic surface rolling processingVerbesserte Oberflacheneigenschaften und Kontaktermudungsleistung von einem ultraschall-oberflachengewalzten Cr4Mo4V-Lagerstahl