Abstract:With the development of modern industry, the demand for environmentally friendly working fluids is gradually increasing. Although binary mixtures have low global warming potential, their boiling heat transfer performance is generally lower than that of pure components. To enhance their applications in boiling heat transfer, it is of great research significance to improve the boiling heat transfer coefficient (HTC) of binary mixtures by changing the characteristics of the heated surface. This article used a mixture of 30% ethylene glycol and deionized water as the working fluid to experimentally study the effect of a series of modified heated surfaces on their boiling heat transfer performance. Including heated surfaces with different roughness polished with 320#, 800#, and 2000# sandpapers, heated surfaces covered with TiO 2 and Al 2 O 3 nanoparticle coatings with varying diameters of nano particles, and two state-of-art types of microstructure heated surfaces. The experimental results indicated that most modified heated surfaces can improve the boiling performance of the working fluid. Among them, the heated surfaces that changed the roughness due to sandpaper polishing had the least improvement effect on HTC. The microstructure surfaces had the best performance in HTC improvement. The reason for this phenomenon is that the microstructure not only changes the roughness of the heated surface but also increases the heat transfer area. Although nanoparticle coatings enhanced the heat transfer performance, the TiO 2 nanoparticle coatings showed better performance than Al 2 O 3 , which may be related to the stability of nanoparticle coatings.

Effect of Hydrophilic Properties of Packings on Mass Transfer Performance of Water Distillation

Mass Transfer Enhancement in Non‐dispersive Solvent Extraction with Helical Hollow Fiber Enabling Dean Vortices

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Effect of coating based on various hollow fiber packings on distillation of IPA/water system

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Physicochemical Characteristics of Hollow Fiber Structured Packings in Isopropanol/Water Distillation

Distillation of Alcohol/water Solution in Hybrid Metal–organic Framework Hollow Fibers

Surface hydrophobicity based heat and mass transfer mechanism in membrane distillation

Numerical Investigation of Liquid Dispersion by Hydrophobic/hydrophilic Mesh Packing Using Particle Method

Separation of Alcohol−Water Solutions by Distillation Through Hollow Fibers

Distillation of Methanol–water Solution in Hollow Fibers

Modeling investigation of mass transfer of gas-liquid-liquid dispersion systems

Hydrodynamics and mass transfer performance analysis of flow-guided trapezoid spray packing tray

Effects of Hydrophilic Coating on Air Side Heat Transfer and Friction Characteristics of Wavy Fin and Tube Heat Exchangers under Dehumidifying Conditions

Effects of nanoparticles with different wetting abilities on the gas–liquid mass transfer

Numerical study on heat and mass transfer characteristics of surface wettability

Effect of Electrolytes on CO−Water Mass Transfer

Experimental study on the effect of modified heated surfaces on the heat transfer performance of deionized water and ethylene glycol binary mixtures

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Distillation Performance of Using PVA/PAN Hollow Fiber Composite Membrane As Packing to Separate the Ethanol-Water Solution