Abstract:Summary The phase change material is currently being regarded as an effective cooling media to be applied in the thermal management of lithium batteries‐powered vehicles, in which the inorganic hydrate phase change material is desirable and widely investigated due to the high thermal conductivity, latent heat value, and low cost. However, when applied to thermal energy storage applications, supercooling and phase separation are problematic. To effectively circumvent this issue, this work considers utilizing the disodium hydrogen phosphate dodecahydrate as the matrix of the composite phase change material, as the phase transition temperature is suitable for the battery's operating temperature range. Meanwhile, the nucleating agent sodium metasilicate nonahydrate with similar lattice parameters and the thickener carboxymethyl cellulose are used to suppress the supercooling and eliminate the phase separation, respectively. Effects of nucleating agent, surface modified aluminum nitride, and short‐cut carbon fiber on the supercooling degree, and thermal conductivity and curing performance in the phase change material are evaluated and discussed in detail to determine the optimal preparation scheme for Na2HPO4·12H2O/modified AlN/CF inorganic composite phase change materials. Experimental results show that the addition of 4 wt% Na2SiO3·9H2O, 4 wt% CMC, 12 wt% modified AlN, and 6 wt% CF reduces the supercooling degree of the composite phase change material to 1.9°C and increases the thermal conductivity to 1.86 W/(m·K). The composite phase change material is found to have a suitable phase change temperature (35°C), high latent heat (249 J/g), excellent shaping effect, and electrical safety performance. In addition, the composite phase change material battery module can effectively control the battery's temperature, with the maximum temperature reduced by 40.9°C at 3C discharge rate and 30°C ambient temperature compared with the natural cooling battery module. The maximum temperature difference of the composite phase change material battery module is shown to be reduced to the minimum value of 0.9°C. Highlights A novel disodium hydrogen phosphate dodecahydrate—modified aluminum nitride—carbon fiber composite phase change material is designed and prepared for battery thermal management systems. The antiwater modification scheme of AlN is proposed and assessed. The effects of AlN before and after modification on the thermal properties of CPCM are compared. The joint use of nucleating agent sodium metasilicate nonahydrate and thermal conductive filler AlN contributes to significantly inhibiting the supercooling of hydrate salt. The addition of CF can effectively increase the thermal conductivity of CPCM and prevent its leakage. CPCM has suitable phase change temperature, high thermal conductivity and latent heat value, excellent electrical safety, and stable curing performance. The battery test bench is constructed and the discharge test of the CPCM battery module is carried out. The results show that the CPCM battery module has excellent cooling performance and temperature uniformity.

Research on the High Thermal Conductivity Composite Phase Change Materials with Graphite Nanosheets for Battery Thermal Safety

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

High thermal conductivity composite phase change material with nano-Ag particles modified diatomite and expanded graphite for improving battery thermal management efficiency

High thermal conductive and anti-leakage composite phase change material with halloysite nanotube for battery thermal management system

High Antileakage and Thermal Conductivity Composite Phase-Change Material with Anisotropy Expanded Graphite for Battery Thermal Management

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

High thermal conductivity composite phase change material with Zn 2+ metal organic gel and expanded graphite for battery thermal management

Diatom-Based Biomass Composites Phase Change Materials with High Thermal Conductivity for Battery Thermal Management

Experimental study of novel nickel foam-based composite phase change materials for a large-capacity lithium-ion power battery module

Experimental Study of a Passive Thermal Management System Using Expanded Graphite/Polyethylene Glycol Composite for Lithium-Ion Batteries

Experimental investigation of aluminum nitride/carbon fiber‐modified composite phase change materials for battery thermal management

Research on novel battery thermal management system coupling with shape memory PCM and molecular dynamics analysis

A novel stable and flexible composite phase change materials for battery thermal management

Heat Transfer Performance Study on Several Composite Phase Change Materials for Battery Thermal Management

Flexible Composite Phase-Change Material with Shape Recovery and Antileakage Properties for Battery Thermal Management

Investigation on the Thermal Contact Resistance Mechanism of a Composite Phase Change Material for Battery Thermal Management

Experimental investigation on thermally induced aluminum nitride based flexible composite phase change material for battery thermal management

Multifunctional flexible composite phase change material with high anti-leakage and thermal conductivity performances for battery thermal management

Effect Analysis on Thermal Management of Power Batteries Utilizing a Form-Stable Silicone Grease/Composite Phase Change Material

The intrinsic flame retardant multifunctional composite phase change material with phosphorus pentoxide for battery thermal safety system

Study on the potential of multi-performance enhanced phase change materials in battery thermal management