Abstract:Due to the low content of alloying elements and the lack of effective nucleation sites, the fusion zone (FZ) of tungsten inert gas (TIG) welded AZ31 alloy typically exhibits undesirable coarse columnar grains, which can result in solidification defects and reduced mechanical properties. In this work, a novel welding wire containing MgO particles has been developed to promote columnar-to-equiaxed transition (CET) in the FZ of TIG-welded AZ31 alloy. The results show the achievement of a fully equiaxed grain structure in the FZ, with a significant 71.9% reduction in grain size to 41 mu m from the original coarse columnar dendrites. Furthermore, the combination of using MgO-containing welding wire and pulse current can further refine the grain size to 25.6 mu m. Microstructural analyses reveal the homogeneous distribution of MgO particles in the FZ. The application of pulse current results in an increase in the number density of MgO (1-2 mu m) from 5.16 x 104 m-3 to 6.18 x 104 m-3 . The good crystallographic matching relationship between MgO and alpha-Mg matrix, characterized by the orientation relationship of [112 0 ] alpha-Mg //[01 1 ] MgO and (0 0 02 ) alpha-Mg //( 111) MgO , indicates that the MgO particles can act as effective nucleation sites for alpha Mg to reduce nucleation undercooling. According to the Hunt criteria, the critical temperature gradient for CET is greatly enhanced due to the significantly increased number density of MgO nucleation sites. In addition, the correlation with the thermal simulation results reveals a transition in the solidification conditions within the welding pool from the columnar grain zone to the equiaxed grain zone in the CET map, leading to the realization of CET. The exceptional grain refinement has contributed to a simultaneous improvement in the strength and plasticity of welded joints. This study presents a novel strategy for controlling equiaxed microstructure and optimizing mechanical properties in fusion welding or wire and arc additive manufacturing of Mg alloy components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Microstructure and Strengthening Mechanism of TIG Welded Joints of a Mg-Nd-Gd Alloy: Effects of Heat Input and Pulse Current

Microstructure evolution and corrosion behavior of TIG welded joint of a new Mg Gd Nd Zn Zr alloy during post-weld heat treatment

Effect of Welding Current on Microstructure and Properties of TIG Welded EW75 Magnesium Alloy

Microstructures and Mechanical Properties of Resistance Spot Welded Magnesium Alloy Joints

Microstructure and mechanical properties of Al/Mg resistance element welded joints

Influence of TIG welding process parameters on microstructure and mechanical properties of as-cast Mg-8Li-3Al-2Zn-0.5Y alloy

Exceptional Grain Refinement Induced by Dispersed MgO Particles in TIG-welded AZ31 Alloy

Influence of Post-weld Tempering Pulse on Microstructure and Mechanical Properties of NDM2 Rare Earth Magnesium Alloy Joint Welded by Resistance Spot Welding

Research for microstructure and mechanical properties of AZ91 magnesium alloy welded joint with magnetic field and activated flux

Microstructural Evolution and Strengthening Mechanism of Mg-Y-RE-Zr Alloy Fabricated by Quasi-Directed Energy Deposition

Effect of welding current on strength and microstructure in resistance spot welding of AZ31 Mg alloy

Microstructure and Mechanical Properties of Repair Welds of Low-Pressure Sand-Cast Mg–Y–RE–Zr Alloy by Tungsten Inert Gas Welding

Analysis of the Response of Thermal-Affect and Multiplex Strengthening Mechanisms of Mg-10Gd Electron Beam Welded Joint

Microstructure and mechanical properties of Mg-Nd-Zn-Zr alloy fabricated by TIG-based wire - arc directed energy deposition with pulsed current

Study on the weld formation, microstructure and mechanical properties of AZ31B Mg alloy in AC/DC mixed gas tungsten arc welding process

Microstructure Evolution of AZ91 Magnesium Alloy Welded Joint under Magnetic Field and NiCl2 Activated Flux

Mechanical Properties and Microstructures of Laser-TIG Welded ME21 Rare Earth Mg Alloy

Microstructure characteristics and mechanical properties of Al/Mg joints manufactured by magnetic pulse welding

Study of Microstructure and Properties of AZ91 Magnesium Alloy Welded Joint with Magnetic Field and TiO2 Activated Flux

Microstructure and properties of vacuum electron beam welded WE43 magnesium alloy joint

Identification of intermetallics in the laser-welded joint of rare-earth magnesium alloy and the corresponding strengthening mechanisms