Abstract:Displacive martensitic transformation usually prevails in face-centered cubic (FCC) steels and high-entropy alloys (HEAs) of low stacking fault energy (SFE; e.g., <15 mJ/m 2 ) upon deformation. Here, we present and rationalize an unexpectedly sluggish and suppressed martensitic transformation behavior in a newly developed non-equiatomic HEA (Fe 30 Ni 20 Co 20 Cr 20 Si 10 , at.%) with an ultralow SFE, i.e., ∼7 mJ/m 2 measured by weak-beam dark-field scanning transmission electron microscopy (STEM) at room temperature. The recrystallized FCC HEA with an average grain size of ∼14.9 μm shows an ultimate tensile strength of 903 MPa and a fracture elongation of ∼83.1%. Plastic deformation of this alloy with ultralow SFE is characterized by the intensive formation of stacking faults (SFs), whereas the volume fraction of hexagonal close-packed (HCP) martensite is very low even at cold-rolled state with an equivalent strain of 1.85, i.e., < 8.3% according to neutron diffraction analysis. Atomic-scale TEM observation demonstrates that chemical short-range order (CSRO) domains are present in the FCC solid solution. Apart from contributing to the high strength, the CSRO domains and atomic size misfit (2.36%) promoted by the high content of Si are regarded to enhance the local barrier for the successive accumulation of SFs, hindering the formation of HCP martensite and mechanical twin. The uniform formation of SFs in the FCC matrix upon deformation effectively alleviates strain localization, contributing to the sustained strain-hardening ability and super-ductility. These insights suggest a strategy to design low-SFE alloys with excellent mechanical properties via manipulating the rate of martensitic transformation by CSROs and atomic size misfit.

Precipitate-mediated Metastability of a Hetero-Structured Ferrous High-Entropy Alloy with Superior Strain Hardening Ability

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

An additively manufactured precipitation hardening medium entropy alloy with excellent strength-ductility synergy over a wide temperature range

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Work hardening behavior of hot-rolled metastable Fe50Co25Ni10Al5Ti5Mo5 medium-entropy alloy: in situ neutron diffraction analysis

Excellent strength-ductility synergy and corrosion resistance in a metastable high entropy alloy via heterogeneous structure design

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Mechanical behavior and microstructure-property correlation of a metastable interstitial high entropy alloy with hierarchical gradient structures

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

Heterogeneous Structure Design to Strengthen Carbon-Containing CoCrFeNi High Entropy Alloy

Ultrastrong and Ductile Metastable Fe-rich Medium-Entropy Alloy with High-Density Nanolamellar L12 Precipitates

Heterostructuring an equiatomic CoNiFe medium-entropy alloy for enhanced yield strength and ductility synergy

Atomic Deformation Mechanism and Interface Toughening in Metastable High Entropy Alloy

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

Microstructure and tensile properties of metastable Fe50Mn30Co10Cr10 high-entropy alloy prepared via powder metallurgy

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Unexpected sluggish martensitic transformation in a strong and super-ductile high-entropy alloy of ultralow stacking fault energy

Awakening the metastability of an interstitial high entropy alloy via severe deformation

Tailoring Mechanical and Electrochemical Properties of the Cr15Fe20Co35Ni20Mo10 High-Entropy Alloy via the Competition between Recrystallization and Precipitation Processes