Abstract:A comprehensive analytical model for predicting the long-term durability of polymers and polymer matrix composites should in general take into account polymer viscoelastic/viscoplastic creep, hygrothermal effects, and the effects of physical and chemical ageing on material response. These effects, in turn are influenced by a multitude of factors such as polymer morphology, service temperature, ambient relative humidity, internal moisture concentrations, stacking sequence, fibre volume fraction, fibre architecture, applied stress level, degree of damage and ageing time. The primary objective of this paper is to present a multi-scale modelling methodology to simulate the long-term interlaminar properties in polymer matrix woven composites and then predict the critical regions where failure is most likely to occur. A micro-mechanics approach towards modelling the out-of-plane viscoelastic behaviour of a five-harness satin woven-fibre cross-ply composite laminate is presented, taking into consideration the weave architecture and time-dependent effects. In-plane properties are assumed to be dominated by the carbon fibres and are hence deemed elastic. The classical lamination theory model proposed by Raju and Wang is adapted to include the in-plane elastic behaviour of woven fibre composites. For the matrixdominated out-of-plane response, a viscoelastic creep model is employed to model the resin, based on Schapery's nonlinear viscoelastic constitutive law. In addition, physical ageing of the matrix has been included in the model, using the effective time theory proposed by Struik. Furthermore, the effect of large deflections and rotations on the time dependent out-of-plane behaviour is also investigated using the micro-mechanics model. The homogenized in-plane and out-of-plane compliance obtained using the proposed micro-mechanics methodology could be applied within the framework of a structural finite element code to model the macro-scale long-term behaviour of a woven fabric composite structure.

Characterization of nonlinear viscoelastic behaviors of CF/EP laminates with consideration to physical aging effect under thermo-mechanical loading

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Long‐term creep deformation of carbon fiber/epoxy composites with physical aging: Experimental investigation and constitutive modeling

Modeling Long-Term Creep and Physical Aging Behavior of Carbon/Epoxy Composites Based on Coupling Model

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Modeling of Load Responses and Aging of High Strength Fibers Considering UV-radiation

Characterization and Modeling of the Creep Behavior of Fiber Composites with Tension and Compression Asymmetry

An Improved Analytical Solution For Process-Induced Residual Stresses And Deformations In Flat Composite Laminates Considering Thermo-Viscoelastic Effects

The Effect of Viscoelasticity and Damage in Relation to the Acceleration of Fatigue and Creep Testing of Composites Using Time-Temperature Superposition

Effect of hygrothermal aging on moisture diffusion and tensile behavior of CFRP composite laminates

A viscoelastic-plastic model for the temperature-dependent creep and recovery behavior during dry fiber fabric compaction

A Thermo-Viscoelastic Analytical Model for Residual Stresses and Spring-in Angles of Multilayered Thin-Walled Curved Composite Parts

Multiscale modeling of mechanical behaviors of carbon fiber reinforced epoxy composites subjected to hygrothermal aging

Time-temperature behavior of carbon/epoxy laminates under creep loading

Description of Nonlinear Viscoelastic Behavior and Creep-Rupture Time of Anisotropic Conductive Film

Modeling of the Nonlinear Dynamic Degradation Characteristics of Fiber-Reinforced Composite Thin Plates in Thermal Environment

Thermal Cycling Influences on Compressive Deformations of Laminate Composites

Fatigue-creep Damage Model for Carbon Fibre Reinforced Composites under High Temperature Cyclic Loading

Experimental and theoretical investigations of the viscoelastic behaviour of short carbon fiber reinforced polyetherimide composites

Modeling and evaluation of dynamic degradation behaviours of carbon fibre-reinforced epoxy composite shells

Lumped Parameter Modeling of Dynamic Degradation Characteristics of Fiber-Reinforced Composite Sheets in Thermal Environment