Abstract:A comprehensive analytical model for predicting the long-term durability of polymers and polymer matrix composites should in general take into account polymer viscoelastic/viscoplastic creep, hygrothermal effects, and the effects of physical and chemical ageing on material response. These effects, in turn are influenced by a multitude of factors such as polymer morphology, service temperature, ambient relative humidity, internal moisture concentrations, stacking sequence, fibre volume fraction, fibre architecture, applied stress level, degree of damage and ageing time. The primary objective of this paper is to present a multi-scale modelling methodology to simulate the long-term interlaminar properties in polymer matrix woven composites and then predict the critical regions where failure is most likely to occur. A micro-mechanics approach towards modelling the out-of-plane viscoelastic behaviour of a five-harness satin woven-fibre cross-ply composite laminate is presented, taking into consideration the weave architecture and time-dependent effects. In-plane properties are assumed to be dominated by the carbon fibres and are hence deemed elastic. The classical lamination theory model proposed by Raju and Wang is adapted to include the in-plane elastic behaviour of woven fibre composites. For the matrixdominated out-of-plane response, a viscoelastic creep model is employed to model the resin, based on Schapery's nonlinear viscoelastic constitutive law. In addition, physical ageing of the matrix has been included in the model, using the effective time theory proposed by Struik. Furthermore, the effect of large deflections and rotations on the time dependent out-of-plane behaviour is also investigated using the micro-mechanics model. The homogenized in-plane and out-of-plane compliance obtained using the proposed micro-mechanics methodology could be applied within the framework of a structural finite element code to model the macro-scale long-term behaviour of a woven fabric composite structure.

Experimental and numerical research on the nonlinear creep response of polymeric composites under humid environments

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

A viscoelastic-plastic model for the temperature-dependent creep and recovery behavior during dry fiber fabric compaction

Modeling Long-Term Creep and Physical Aging Behavior of Carbon/Epoxy Composites Based on Coupling Model

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Measurement and Modeling Concrete Creep Considering Relative Humidity Effect

Modeling of Load Responses and Aging of High Strength Fibers Considering UV-radiation

Prediction of creep performance during long-term storage of composite directors based on nonlinear viscoelasticity

Characterization and prediction of the nonlinear creep behavior of 3D-printed polyurethane acrylate

Multiscale modeling of mechanical behaviors of carbon fiber reinforced epoxy composites subjected to hygrothermal aging

A Phenomenological Primary–Secondary–Tertiary Creep Model for Polymer-Bonded Composite Materials

Long‐term creep deformation of carbon fiber/epoxy composites with physical aging: Experimental investigation and constitutive modeling

Elastic-Viscoplastic Modeling for Natural Soft Clays Considering Nonlinear Creep

Numerical simulation analysis of forming of continuous fiber reinforced polypropylene composites: Relaxation, creep, and hot stamping

Experimental and theoretical investigations of the viscoelastic behaviour of short carbon fiber reinforced polyetherimide composites

Application of a Composite Model in the Analysis of Creep Deformation at Low and Intermediate Temperatures

Influence of Environmental Humidity and Temperature on the Creep Behavior of Sandwich Panel

Thermo-hydro-mechanical viscoplastic constitutive model for polyester strap reinforcement long-term response

Multi-scale Modelling of Moisture Diffusion Coupled with Stress Distribution in CFRP Laminated Composites

Micromechanical Modeling of Creep Behavior in Particle-Reinforced Silicone-Rubber Composites

Numerical Simulation of High-Strength Concrete Creep under Cyclic Load