Abstract:ConspectusThe reversible coexsolution mechanism of perovskite oxides is emerging as an alternative method for synthesizing alloy catalyst nanoparticles. Co-exsolution is a partial decomposition process where multiple B cations diffuse from the bulk of a solid precursor and nucleate on the surface. The unique properties of exsolved alloy catalysts, including improved dispersion, thermal stability, and compositional malleability, make them particularly useful for converting CO2 into chemical commodities and fuels. However, the coexsolution of alloys is still in development, and fundamental insights into the alloying mechanism, formation of nanoparticles, and defect chemistry are needed.This Account examines the solid-state chemistry of perovskite oxide precursors and reaction parameters that can be altered to control the assembly or exsolution of Ni-based alloys. The characteristics of bulk perovskite oxide precursors heavily influence the exsolved alloy catalyst nanoparticle assembly, growth, and composition. Inherent defects, such as oxygen vacancies and grain boundaries, primarily facilitate the transport of catalytic B-cation dopants from the bulk to the surface. An example of how bulk defects can affect the properties of Ni-based alloy catalysts is demonstrated through the formation of NiFe from La(Fe, Ni)O3. The A/B cation ratio plays a significant role in determining the size and composition of NiFe nanoparticles, which directly impacts their catalytic performance. Using in situ X-ray absorption spectroscopy (in situ XAS), the dynamic behavior of exsolved NiFe nanoparticles can be observed in different reaction environments (oxidation, reduction, and dry reforming of methane) by tracking the oxidation state and local environment of the Ni K-edge and Fe K-edge using X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), respectively. Time-resolved experiments with in situ XAS showed that NiFe nanoparticle growth starts at ∼280 °C and transforms from predominantly Ni to NiFe at higher reduction times and temperatures.The challenges of exsolution of higher-order Ni-based alloys, such as 3(NiFeCo), 4(NiCoCuPd), and 5(NiFeCoCuPd) element nanoparticles, to improve the catalyst properties are discussed. The size, concentration, and reducibility of the dopant cation can alter the exsolution kinetics, alloy nanoparticle growth dynamics, and catalyst performance. The size and composition of exsolved Ni-based alloys affect the effectiveness of catalysts in the dry reforming of methane. Large NiFeCo nanoparticles separated from Pd and Cu can lead to catalyst deactivation, but using a complex alloy with smaller NiFeCoPdCu nanoparticles results in a stable performance. The use of in situ XANES reveals how the dry reforming of methane reaction conditions can induce changes in the NiFe with the rapid redissolution of Fe back into the lattice.The dynamicity of the exsolved Ni-based alloy nanoparticles and implications for their regeneration after aging or exposure to waste gas contaminants are discussed. Finally, we summarize the Account and provide promising future directions.

Exsolution of Co-Fe Alloy Nanoparticles on the PrBaFeCoO5+? Layered Perovskite Monitored by Neutron Powder Diffraction and Catalytic Effect on Dry Reforming of Methane

In Situ Investigation Of Reversible Exsolution/Dissolution Of Cofe Alloy Nanoparticles In A Co-Doped Sr2fe1.5mo0.5o6-Delta Cathode For Co2 Electrolysis

Surface Decomposition of Doped PrBaMn 2 O 5+δ Induced by In Situ Nanoparticle Exsolution: Quantitative Characterization and Catalytic Effect in Methane Dry Reforming Reaction

Atypical Stability of Exsolved Ni-Fe Alloy Nanoparticles on Double Layered Perovskite for Co2 Dry Reforming of Methane

Iron-triggered Exsolution of FeNi Alloy Nanoparticles Via Topotactic Cation Exchange on Pr0.7Sr0.3Cr0.9Ni0.1O3−δ Perovskite for CO2 Electrolysis

Co-Exsolution of Ni-Based Alloy Catalysts for the Valorization of Carbon Dioxide and Methane

Atomic‐Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Mo 0.1 O 3− Δ with Efficient CO 2 Electrolysis

Effective Oxygen Reduction Reaction Performance of FeCo Alloys In Situ Anchored on Nitrogen-Doped Carbon by the Microwave-Assistant Carbon Bath Method and Subsequent Plasma Etching

In Situ Exsolution of Quaternary Alloy Nanoparticles for CO2‐CO Mutual Conversion Using Reversible Solid Oxide Cells

Unveiling the Interface Structure of the Exsolved Co-Fe Alloy Nanoparticles from Double Perovskite and Its Application in Solid Oxide Fuel Cells.

Highly Active Cofe Alloy Nanoparticlesencapsulated in N-Doped Carbon Nanostructures for Oxygen Reduction Reaction in Both Alkaline and Acidic Media

Core-alloyed Shell Structured Fe@FeCo Di-Atomic Nanoclusters Loaded in Carbon Aerogels As Efficient Bi-Functional Catalysts Towards ORR and HER

Promoting Exsolution of RuFe Alloy Nanoparticles on Sr2Fe1.4Ru0.1Mo0.5O6−δ Via Repeated Redox Manipulations for CO2 Electrolysis

Exsolution Synthesis of Alloyed Nanoparticles from Perovskite Oxide by Plasma

Exsolution of CoFe(Ru) nanoparticles in Ru-doped (La0.8Sr0.2)0.9Co0.1Fe0.8Ru0.1O3−δ for efficient oxygen evolution reaction

Highly Efficient B-Site Exsolution Assisted by Co Doping in Lanthanum Ferrite toward High-Performance Electrocatalysts for Oxygen Evolution and Oxygen Reduction

Promoting catalysis activity with optimizable self-generated Co-Fe alloy nanoparticles for efficient CO2 electrolysis performance upgrade

In Situ Exsolved CoFe Alloy Nanoparticles for Stable Anodic Methane Reforming in Solid Oxide Electrolysis Cells

Thermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces

Co–Fe Alloy Nanoparticles and Fe3C Nanocrystals on N-doped Biomass-Derived Porous Carbon for Superior Electrocatalytic Oxygen Reduction

Enhancing the Catalytic Activity and Coking Tolerance of the Perovskite Anode for Solid Oxide Fuel Cells through In Situ Exsolution of Co-Fe Nanoparticles