Abstract:Foam stability is significantly important for enhancing oil recovery and sequestration of carbon dioxide underground. Nanoparticles have been widely used to improve foam stability, but traditional experiments cannot well reveal the mechanisms of nanoparticles on stabilizing foams and the interactions among nanoparticles, surfactants, and liquid films. In order to clarify the mechanisms of enhancing foam stability by nanoparticles, the adsorption behaviors of nanoparticles with different modification degrees on the liquid film and the effects of different compounded systems of nanoparticles and surfactants on the foam stability were studied by molecular simulation. Moreover, the foam stability of the compounded systems was evaluated by experiments. The results show that the foam stability of single nanoparticles increases first and then decreases with the increase of hydrophobic properties. The electrically charged properties of nanoparticles can significantly affect the foam stability of the compound system with nanoparticles and surfactants. The electrostatic repulsion between hydrophilic nanoparticles and anionic surfactants results in irregular arrangement of surfactants in the liquid film, which reduces foam stability. On the contrary, the electrostatic attraction between cationic surfactants and hydrophilic nanoparticles can promote the orderly arrangement of cationic surfactants and thus enhance the foam stability. Amphiphilic nanoparticles can interact with anionic or cationic surfactants, which not only strengthens the regular arrangement of surfactants on the interface but also fills the interface cavity and improves the foam stability. In addition, the experimental results show that there is an optimal ratio between nanoparticles and surfactants. Nanoparticles can reduce the foaming volume to a certain extent, but appropriate nanoparticles can effectively prolong the foam half-life. This study elucidates the mechanism of the nanoparticles/surfactant system in enhancing foam stability and provides an important theoretical basis and guidance for nanoparticle modification and optimization of foam flooding.

Effect and Mechanism of Different Surfactants on the Stability of the Al/JP-10 Nanofluid Fuel System

Improved Dispersion Stability of Water-Based Tio2 Nanofluids Through Combined Effects of Nanoparticle Mixing and Dispersant Addition

Measurement and Analysis of Surface Tension of B/JP-10 High-Energy Nanofluid Fuels for Enhanced Heat Transfer in Combustion

Investigations on the Influencing Mechanisms of SiO 2 Nanoparticles on Foam Stability

Experimental Investigation of the Settling Characteristics of Carbon and Metal Oxide Nanofuels

Influence of nano-aluminum hydroxide on foam properties of the mixtures of hydrocarbon and fluorocarbon surfactants

Enhancement effect of β-Alumina nanoparticle concentration on foam thermal stability of the mixture of Fluorocarbon/Hydrocarbon surfactants

Influence of nanoparticles on the foam thermal stability of mixtures of short-chain fluorocarbon and hydrocarbon surfactants

Adsorption Behaviour of Tween 85 on Nano-Aluminium Particles in Aluminium/JP-10 Suspensions

Tuning stability, rheology, and fire-extinguishing performance of advanced firefighting foam material by inorganic nanoparticle flame retardants

Effect of liquid fuel on foamability and foam stability of mixtures of fluorocarbon and hydrocarbon surfactants

Nanosizing and Al-Mg alloying effects of boron particles on combustion characteristics and energy release of B/JP-10 suspension fuel

Investigation of the synergistic effect of alumina nanofluids and surfactant on oil recovery – Interfacial tension, emulsion stability and viscosity reduction of heavy oil

Jet fuel containing ligand-protecting energetic nanoparticles: A case study of boron in JP-10

Investigation on the Stability of Janus SiO 2 - n Nanoparticle-Assisted Nonionic Surfactant-Stabilized Foam and Its Application in Enhanced Oil Recovery

Influence of nanoparticles on rheological properties and foam properties of mixed solutions of fluorocarbon and hydrocarbon surfactants

Ignition and combustion characteristics and agglomerate evolution mechanism of aluminum in nAl/JP-10 nanofluid fuel

Effect of Nanoparticle Addition on Evaporation of Jet Fuel Liquid Films and Nanoparticle Deposition Patterns during Evaporation

Optimization effect and reaction mechanism of flake aluminum powder on the combustion performance of high-energy-density JP-10/PO composite fuel

Preparation and Catalytic Combustion of JP?10 Based Pt Nanofluid Fuels Stabilized by Hyperbranched Polymer

Synergistic improvement of foam stability with SiO2 nanoparticles (SiO2-NPs) and different surfactants