Abstract:Foam stability is significantly important for enhancing oil recovery and sequestration of carbon dioxide underground. Nanoparticles have been widely used to improve foam stability, but traditional experiments cannot well reveal the mechanisms of nanoparticles on stabilizing foams and the interactions among nanoparticles, surfactants, and liquid films. In order to clarify the mechanisms of enhancing foam stability by nanoparticles, the adsorption behaviors of nanoparticles with different modification degrees on the liquid film and the effects of different compounded systems of nanoparticles and surfactants on the foam stability were studied by molecular simulation. Moreover, the foam stability of the compounded systems was evaluated by experiments. The results show that the foam stability of single nanoparticles increases first and then decreases with the increase of hydrophobic properties. The electrically charged properties of nanoparticles can significantly affect the foam stability of the compound system with nanoparticles and surfactants. The electrostatic repulsion between hydrophilic nanoparticles and anionic surfactants results in irregular arrangement of surfactants in the liquid film, which reduces foam stability. On the contrary, the electrostatic attraction between cationic surfactants and hydrophilic nanoparticles can promote the orderly arrangement of cationic surfactants and thus enhance the foam stability. Amphiphilic nanoparticles can interact with anionic or cationic surfactants, which not only strengthens the regular arrangement of surfactants on the interface but also fills the interface cavity and improves the foam stability. In addition, the experimental results show that there is an optimal ratio between nanoparticles and surfactants. Nanoparticles can reduce the foaming volume to a certain extent, but appropriate nanoparticles can effectively prolong the foam half-life. This study elucidates the mechanism of the nanoparticles/surfactant system in enhancing foam stability and provides an important theoretical basis and guidance for nanoparticle modification and optimization of foam flooding.

Tuning stability, rheology, and fire-extinguishing performance of advanced firefighting foam material by inorganic nanoparticle flame retardants

Tuning thermal stability of fluorine-free foam by nano-MDH inorganic flame retardant

Influence of nanoparticles on the foam thermal stability of mixtures of short-chain fluorocarbon and hydrocarbon surfactants

Role of nanoparticles in the performance of foam stabilized by a mixture of hydrocarbon and fluorocarbon surfactants

Study on the Effect of Nanoparticles Combined with Silicone Surfactant and Cationic Surfactant on Foam and Fire Extinguishing Performance

Investigation on thermal stability of highly stable fluorine-free foam co-stabilized by silica nanoparticles and multi-component surfactants

Enhancement effect of β-Alumina nanoparticle concentration on foam thermal stability of the mixture of Fluorocarbon/Hydrocarbon surfactants

Influence of nanoparticles on rheological properties and foam properties of mixed solutions of fluorocarbon and hydrocarbon surfactants

Influence of nano-aluminum hydroxide on foam properties of the mixtures of hydrocarbon and fluorocarbon surfactants

Effect of liquid fuel on foamability and foam stability of mixtures of fluorocarbon and hydrocarbon surfactants

Aggregation behavior and foam properties of the mixture of hydrocarbon and fluorocarbon surfactants with addition of nanoparticles

Investigations on the Influencing Mechanisms of SiO 2 Nanoparticles on Foam Stability

Rheological properties of fluorine-free foams stabilized by aluminum hydroxide nanoparticles and mixture of siloxane and hydrocarbon surfactants

Experimental study on the mechanism of nanoparticles improving the stability of high expansion foam

Experimental Study on Foam Properties of Mixtures of Organic Silicon and Hydrocarbon Surfactants Regulated by Nano-SiO2 Particles

Effect of hydrophilic silica nanoparticles on foam properties of mixtures of silicone and hydrocarbon surfactants

Thermal Stability of Gel Foams Stabilized by Xanthan Gum, Silica Nanoparticles and Surfactants

The Study of the Stability of Aqueous Three-Phase Fire-Resistant Foam in Typical Liquidus Hydrocarbons

Comparative Study on Interfacial Properties, Foam Stability, and Firefighting Performance of C6 Fluorocarbon Surfactants with Different Hydrophilic Groups

Study on the effects of carbon nanotubes and xanthan gum on the performance of hydrocarbon surfactant foam systems

Utilization of Surfactant-Stabilized Foam for Enhanced Oil Recovery by Adding Nanoparticles