Abstract:Linker-free magnetite nanoparticles (Fe3O4NPs)-decorated gold nanoparticles (AuNPs) were grown using a new protocol that can be used as a new platform for synthesis of other intact metal–metal oxide nanocomposites without the need for linkers. This minimizes the distance between the metal and metal oxide nanoparticles and ensures the optimum combined effects between the two material interfaces. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy confirmed the successful synthesis of the Fe3O4-Au nanocomposite, without any change in the magnetite phase. Characterization, using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, revealed the composite to consist of AuNPs of 70 ± 10 nm diameter decorated with tiny 10 ± 3 nm diameter Fe3O4NPs in Au:Fe mass ratio of 5:1. The prepared Fe3O4-Au nanocomposite was embedded in ionic liquid (IL) and applied for the modification of glassy carbon electrode (GCE) for the electrochemical detection of As(III) in water. By combining the excellent catalytic properties of the AuNPs with the high adsorption capacity of the tiny Fe3O4NPs towards As(III), as well as the good conductivity of IL, the Fe3O4-Au-IL nanocomposite showed excellent performance in the square wave anodic stripping voltammetry detection of As(III). Under the optimized conditions, a linear range of 1 to 100 μg/L was achieved with a detection limit of 0.22 μg/L (S/N = 3), and no interference from 100-fold higher concentrations of a wide variety of cations and anions found in water. A very low residual standard deviation of 1.16% confirmed the high precision/reproducibility of As(III) analysis and the reliability of the Fe3O4-Au-IL sensing interface. Finally, this proposed sensing interface was successfully applied to analyzing synthetic river and wastewater samples with a 95–101% recovery, demonstrating excellent accuracy, even in complex synthetic river and wastewater samples containing high concentrations of humic acid without any sample pretreatments.

Preparation of Fe−Co−LDH/MXene Modified Electrode for Sensitive Determination of Arsenic (III) in Aquatic System

Noble-metal-free Fe3O4/Co3S4 nanosheets with oxygen vacancies as an efficient electrocatalyst for highly sensitive electrochemical detection of As(III)

Electrochemical Sensing toward Trace As(III) Based on Mesoporous MnFe2O4/Au Hybrid Nanospheres Modified Glass Carbon Electrode

Surface Fe(II)/Fe(III) Cycle Promoted Ultra-Highly Sensitive Electrochemical Sensing of Arsenic(III) with Dumbbell-Like Au/Fe3O4 Nanoparticles

Electrodeposited rGO/AuNP/MnO2 Nanocomposite-Modified Screen-Printed Carbon Electrode for Sensitive Electrochemical Sensing of Arsenic(III) in Water

Linker-Free Magnetite-Decorated Gold Nanoparticles (Fe3O4-Au): Synthesis, Characterization, and Application for Electrochemical Detection of Arsenic (III)

Bipyridine-functionalized Covalent-organic-framework-modified Screen-printed Electrode for Ultrasensitive Electrochemical Determination of Arsenic (III)

Colorimetric determination of As(III) based on 3-mercaptopropionic acid assisted active site and interlayer channel dual-masking of Fe-Co-layered double hydroxides with oxidase-like activity

Silver nanoparticles incorporated local montmorillonite clay modified carbon paste electrode for the voltammetric determination of Arsenic (III) in aqueous solution

Ultra-Sensitive and Selective Detection of Arsenic(III) Via Electroanalysis over Cobalt Single-Atom Catalysts.

Glassy Carbon Electrode Modified with Citrate Stabilized Gold Nanoparticles for Sensitive Arsenic (III) Detection

High Sensitivity Electrochemical As (III) Sensor Based on Fe3O4/MoS2 Nanocomposites

Highly sensitive determination of trace arsenic(III) onto carbon paste electrode modified with graphitic carbon nitride decorated Fe-MOF

Signal Amplification Strategy by Chitosan-Catechol Hydrogel Modified Paper Electrode for Electrochemical Detection of Trace Arsenite

Selective determination of arsenic (III) using a Nafion/α-MnO2@polydopamine modified electrode

Fabrication of a porous hydrangea-like Fe3O4@MnO2 composite for ultra-trace arsenic preconcentration and determination

Aptamer-functionalized Screen-Printed Electrode Coupled with Graphene Oxide and Methylene Blue Nanocomposite As Enhanced Signal Label for Total Arsenic Determination in Shellfish

An All-Solid-state Ion-Selective Electrode with Ag3AsO4 As the Sensitive Membrane for Detecting Arsenate in Aqueous Environments

Reliable Electrochemical Sensing Arsenic(iii) in Nearly Groundwater Ph Based on Efficient Adsorption and Excellent Electrocatalytic Ability of AuNPs/CeO2-ZrO2 Nanocomposite

Anodic Stripping Voltammetric Determination of Arsenic(iii) Using a Glassy Carbon Electrode Modified with Gold-Palladium Bimetallic Nanoparticles

High sensitivity atomic fluorescence spectroscopy for the detection of AsIII by selective electrolysis of arsenic on nanoflowers-like Fe/NFE