Abstract:Selenite (Se4+), a significant source of water pollution above the permissible limits, is considered a valuable metal by environmentalists. In this study, we described a novel electrochemical sensor that utilized a carbon paste electrode (CPE) that was modified using multiwall carbon nanotubes (MWCNTs) and poly(1-aminoanthraquinone) (p-AAQ) for finding Se4+ in water samples. Electrochemical quantification of Se4+ depends on the formation of a selective complex (piaselenol) with p-AAQ. In this work, we prepared a CPE modified by physical embedding of MWCNTs and 1-aminoanthraquione (AAQ), while the polymer film was formed by anodic polymerization of AAQ by applying a constant potential of 0.75 V in 0.1 M HCl for 20 s followed by cyclic voltammetry (CV) from -0.2 to 1.4 V for 20 cycles. The modified CPE was used for differential pulse voltammetry (DPV) of Se4+ in 0.1 M H2SO4 from 0 to 0.4 V with a characteristic peak at 0.27 V. Further, the proposed sensor was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and electrochemical impedance spectroscopy (EIS). The analytical conditions regarding the electrode performance and voltammetric measurements were optimized, with the accumulation time and potential, supporting electrolyte, differential-pulse period/time, and amplitude. The EIS results indicated that the p-AAQ/MWCNTs-modified CPE sensor (p-AAQ/MWCNTs/CPE) that also exhibited low charge-transfer resistance (R ct) toward the anodic stripping of Se4+, exhibited good analytical performance toward different concentrations of Se4+ in a linear range of 5-50 μg L-1 Se4+ with a limit of determination (LOD) of 1.5 μg L-1 (3σ). Furthermore, differential-pulse voltammetry was employed to determine different concentrations of Se4+ in a linear range of 1-50 μg L-1 Se4+, and an LOD value of 0.289 μg L-1 was obtained. The proposed sensor demonstrated good precision (relative standard deviation = 4.02%) at a Se4+ concentration of 5 μg L-1. Moreover, the proposed sensor was applied to analyze Se4+ in wastewater samples that were spiked with Se, and it achieved good recovery values.

Highly sensitive determination of trace arsenic(III) onto carbon paste electrode modified with graphitic carbon nitride decorated Fe-MOF

Electrochemical Determination of Dopamine Using a Carboxyl-functionalized Carbon Nanotube-Modified Carbon Paste Electrode Doped with Polymeric Ferric Sulfate

Silver nanoparticles incorporated local montmorillonite clay modified carbon paste electrode for the voltammetric determination of Arsenic (III) in aqueous solution

Noble-metal-free Fe3O4/Co3S4 nanosheets with oxygen vacancies as an efficient electrocatalyst for highly sensitive electrochemical detection of As(III)

Electrodeposited rGO/AuNP/MnO2 Nanocomposite-Modified Screen-Printed Carbon Electrode for Sensitive Electrochemical Sensing of Arsenic(III) in Water

Selective determination of arsenic (III) using a Nafion/α-MnO2@polydopamine modified electrode

Preparation of Fe−Co−LDH/MXene Modified Electrode for Sensitive Determination of Arsenic (III) in Aquatic System

High sensitivity atomic fluorescence spectroscopy for the detection of AsIII by selective electrolysis of arsenic on nanoflowers-like Fe/NFE

Electrochemical Sensing toward Trace As(III) Based on Mesoporous MnFe2O4/Au Hybrid Nanospheres Modified Glass Carbon Electrode

High Sensitivity Electrochemical As (III) Sensor Based on Fe3O4/MoS2 Nanocomposites

Ultrafast Detection of Arsenic Using Carbon-Fiber Microelectrodes and Fast-Scan Cyclic Voltammetry

Sensitive electrochemical measurement of As (III) using Nafion modified platinum electrode via anode stripping voltammetry

An All-Solid-state Ion-Selective Electrode with Ag3AsO4 As the Sensitive Membrane for Detecting Arsenate in Aqueous Environments

Linker-Free Magnetite-Decorated Gold Nanoparticles (Fe3O4-Au): Synthesis, Characterization, and Application for Electrochemical Detection of Arsenic (III)

Electronic waste derived reduced graphene oxide supported silver nanoparticles for the electrochemical sensing of trace level arsenite in aqueous medium

An enhanced electrochemical catalytic activity towards arsenic (III) detection based on FTO electrode modified with gold nanoparticles by irradiation and electrophoretic deposition

A Novel Electrochemical Sensor for the Determination of Diphenylhydramine Hydrochloride Based on a Carbon Paste Electrode (CPE) Modified with Ferrite–Cobalt–Silica/Ionic Liquid Nanocomposite

Ultra-Sensitive and Selective Detection of Arsenic(III) Via Electroanalysis over Cobalt Single-Atom Catalysts.

Voltammetric and impedimetric determinations of selenium(iv) by an innovative gold-free poly(1-aminoanthraquinone)/multiwall carbon nanotube-modified carbon paste electrode

The Ultra-sensitive Electrochemical Detection of As(III) in Ground Water Using Disposable L-cysteine/Lipoic Acid Functionalised Gold Nanoparticle Modified Screen-Printed Electrodes

SWCNT fibers decorated with Au nanoparticles as voltammetric sensors for arsenic (III) determination