Abstract:Monitoring glucose levels is one of the main diagnostic methods for preventing and treating diabetes. Conventionally monitoring of blood glucose through a finger-stick procedure brings pain. It is essential to develop biosensors for low concentration glucose detection in non-invasive samples. In this paper, a tilted fiber grating based localized surface plasmon resonance (LSPR) biosensor for ultrasensitive glucose detection has been demonstrated. The glucose biosensor was fabricated by immobilization of Au nanoparticles (AuNPs) onto an excessively tilted fiber grating (Ex-TFG) and subsequent biofunctionalization by coating polydopamine and concanavalin A onto the AuNPs/Ex-TFG surface. The biosensor has the response regions covering low, middle and high glucose concentrations. The resonance peak indicates a redshift of 0.24 nm, 0.06 nm and 0.48 nm in the concentration ranges of 1.0 nM $- 1.0\,\, \boldsymbol {\mu }\text{M}$ , $1.0\,\, \boldsymbol {\mu }\text{M}- 50.0\,\, \boldsymbol {\mu }\text{M}$ and $50.0\,\, \boldsymbol {\mu }\text{M}-5.0$ mM, respectively. The limit of detection (LOD) of the biosensor in pure phosphate buffered saline is 2.5 nM. The high sensitivity and specific selectivity for D-glucose detection are attributed to strong coupling between the evanescent fields from transverse magnetic (TM) cladding modes of the Ex-TFG and the localized electric fields from LSPR of the AuNPs and their biofunctionalization, and resulting in remarkable enhancement of localized effective refractive index with slightly increased D-glucose concentration. Especially, the glucose biosensor based on the Ex-TFG coupled with the biofunctionalized AuNPs, has been demonstrated to be of practical utility to detect the glucose in artificial urine, which has potential applications in non-invasive glucose monitoring for early diagnosis and better management of diabetes.

Partly-O-Diamond Solution-Gate Field-Effect Transistor As an Efficient Biosensor of Glucose

Detection of Glucose Using Diamond Solution-Gate Field-Effect Transistor

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Nanocrystalline diamond modified gold electrode for glucose biosensing.

Polyethylene Glycol Functionalized Silicon Nanowire Field-Effect Transistor Biosensor for Glucose Detection

Glucose Sensing Using Functionalized Amorphous In–Ga–Zn–O Field-Effect Transistors

An Integrated Flexible and Reusable Graphene Field Effect Transistor Nanosensor for Monitoring Glucose

Glucose Biosensor Based on ENFET Doped with SiO2 Nanoparticles

Glucose Biosensor Based on Covalent Immobilization of Enzyme in Sol–gel Composite Film Combined with Prussian Blue/carbon Nanotubes Hybrid

High sensitivity glucose detection at extremely low concentrations using a MoS2-based field-effect transistor

Combination of cascade chemical reactions with graphene-DNA interaction to develop new strategy for biosensor fabrication.

Ultrasensitive Glucose Biosensor Using Micro-Nano Interface of Tilted Fiber Grating Coupled with Biofunctionalized Au Nanoparticles

Fabrication of Au/Ni/boron-doped diamond electrodes via hydrogen plasma etching graphite and amorphous boron for efficient non-enzymatic sensing of glucose

Electrochemical Properties Analysis of Immobilized Glucose Oxidase on Multi-Walled Carbon Nanotubes and Hydroxy-Fullerene Nanocomposites

A Glucose Biosensor Based on Direct Electron Transfer of Glucose Oxidase on PEDOT Modified Microelectrode

Electrochemical biosensor employing PbS colloidal quantum dots/Au nanospheres-modified electrode for ultrasensitive glucose detection

Direct Electrochemistry of Glucose Oxidase on Sulfonated Graphene/gold Nanoparticle Hybrid and Its Application to Glucose Biosensing

A Direct Electrochemical Method for Diabetes Diagnosis Based on As-Prepared Boron-Doped Nanocrystalline Diamond Thin Film Electrodes

Electrochemical biosensor based on copper sulfide/reduced graphene oxide/glucose oxidase construct for glucose detection

Diamond FET Biosensor Fabrication and Application

Bienzymatic Glucose Biosensor Based on Poly(vinyl alcohol)/Titanium Dioxide Hybrid Materials and Carbon Nanotubes-Nanocopper-Modified Glassy Carbon Electrode