Melting and Solidification Performance Enhancement of Phase Change Material in a Square Cavity by Utilizing Temperature-Driven Deformable Fin

Zhang-Jing Zheng,Yang Chen,Yu Sun,Chen He,Hang Yin,Yang Xu

DOI: https://doi.org/10.1016/j.applthermaleng.2023.120313

2022-01-01

Abstract:The addition of fins to the phase change material is a simple and efficient means. Nevertheless, conventional fixed fins are difficult to achieve outstanding heat transfer enhancement in melting and solidification processes. In the present work, a temperature-driven deformable fin is proposed to obtain excellent heat transfer enhancement during melting and solidification processes during melting and solidification processes in a two-dimensional square cavity with a constant-temperature left wall. The deformable fin is arranged in the center of the left wall. During the melting process, the deformable fin is designed to bend downward, considering the effect of natural convection. Nevertheless, the fin is designed to return quickly to a horizontal position in the solidification due to the dominance of heat conduction. The enthalpy-porosity method is used to predict the flow and heat transfer during the melting and solidification process, and the dynamic mesh method is used to include the motion of the deformable fin. In order to prove the outstanding heat transfer enhancement of the deformable fin, three existing fixed fins are selected for comparison. The results show that the optimum melting and solidification performance cannot be obtained simultaneously with fixed fins. The fixed straight fin arranged in the center of the left wall (Type 1) has good heat transfer reinforcement during solidification, but the fixed straight fin arranged in the lower part of the left wall (Type 3) has outstanding heat transfer reinforcement during melting. Using deformable fin has a complete solidification time comparable to the use of Type 1, and reduces the complete melting time by 12.6% compared to the use of Type 3. Furthermore, the total thermal energy charge-discharge rate of using deformable fin is increased by 13.1% compared to using Type 1, and increased by 40.4% compared to using Type 3.