Abstract:In recent years, tail rotor failure has been a significant factor in helicopter accidents, contributing to around 30% of all incidents. Among these failures, tail rotor pitch lockup accounts for nearly 2/3. However, there is currently a lack of research on the landing trajectory and control optimization for piloted helicopters facing tail rotor pitch lockup. Therefore, this paper aims to study the landing trajectory and pilot control strategy optimization during helicopter tail rotor pitch lockup. The findings of this research are expected to provide valuable insights and serve as a reference for subsequent real-time pilot-in-the-loop simulations and final flight tests. In this paper, we utilize the UH-60A helicopter as a prototype to establish a flight dynamics model and a pilot model. The aerodynamic forces and induced velocity of the main rotor are calculated using the blade element method and Pitt-Peters model. The rotor flap motion is simplified to a first-order harmonic quantity. We then formulate the problem of safe landing and control optimization as a nonlinear optimal control problem, with the cost function designed to reflect safety and feasibility during the flight and touchdown process. To solve the optimal control problem numerically, we use direct multiple shooting and sequential quadratic programming algorithms. Flight test data for the UH-60A, encompassing steady-state flight, dynamic response, and autorotation landing, are utilized to validate the accuracy of the flight dynamics model and the effectiveness of the optimal control algorithm. Finally, the paper investigates the safe landing trajectories and control strategies for the sample helicopter when encountering high tail rotor pitch lockup and low tail rotor pitch lockup, respectively. Simulation results demonstrate that when the tail rotor is stuck at a high pitch, it is advisable for pilots to execute a high-power state landing by maintaining the engine at high power while reducing forward speed and descent rate. Conversely, when the tail rotor is stuck at a low pitch, flying at an economical speed (in a low-power state) is advantageous, but it does not facilitate a safe landing thereafter. If the pilot attempts a conventional landing, the yaw rate at touchdown would be very high and potentially dangerous. In contrast, if an autorotation landing is executed, the landing will be safer with a much lower yaw rate at touchdown. The optimal landing trajectory and control process align with the recommendations from actual helicopter flight tests. The proposed method provides feasible pilot control strategies for safe landing when helicopters encounter various tail rotor pitch lockup situations. This research can serve as a reference for pilots before conducting actual flight tests.

Force Distribution-Based Control Strategy of Landing Gear for the Unmanned Helicopter Landing on the Inclined Surface.

Whole-Body Control for Autonomous Landing of Unmanned Helicopter Equipped with Antagonistic Cable-Driven Legged Landing Gear

A Novel Impedance-Based Parallel Cooperative Control Method for Front and Rear Landing Gear Hydraulic Systems of UAVs

Cable-driven legged landing gear for unmanned helicopter: Prototype design, optimization and performance assessment

Vertical Modeling and Autonomous Landing of a Mini Unmanned Helicopter

Biomimetic Design for Unmanned Aerial Vehicle Safe Landing in Hazardous Terrain

A Hybrid Control Method for an Unmanned Scale Helicopter Attitude

Control System Design and Flight Testing for a Miniature Unmanned Helicopter

Robust LQR Controller for Landing Unmanned Helicopters on a Slope

Control and implemention on coordinated turn of miniature unmanned helicopter

Automatic Landing Control of Unmanned Helicopter on Ship Deck with Heave Motion Using Robust Output Regulation

Research on Anti-Rollover Adaptive Landing Gear Technology Based on Impedance Control

Enabling landings on irregular surfaces for unmanned aerial vehicles via a novel robotic landing gear

A Control Strategy for Near-Ground Flying Aircrafts Based on Terrain Tracking

Landing Trajectory and Control Optimization for Helicopter Encountering Different Tail Rotor Pitch Lockups

Control System for Vertical Take-Off and Landing Vehicle's Adaptive Landing Based on Multi-Sensor Data Fusion

Modeling and Control of an Aerial Flight Platform Using for Fixed-Wing UAV Landing.

Landing a quadrotor UAV on a moving platform with sway motion using robust control

Landing Control Scheme of Vertical Takeoff and Landing Fixed-wing UAV

Design and Experimental Validation of an Adaptive Landing Gear for Safe Landing on Uneven Grounds of VTOL UAVs in the Context of Lightweight and Fast Adaptations

Research on Aerial Autonomous Docking and Landing Technology of Dual Multi-Rotor UAV