Abstract:In this paper, a control method of a novel tilt-rotor UAV with a blended wing body layout is studied. The novel UAV is capable of vertical take-off and landing and has strong stealth capabilities that can be applied to carrier-borne reconnaissance aircraft. However, the high aspect ratio of blended wing body UAVs leads to a wingtip or oar-tip touchdown problem when adopting the conventional position-attitude control (CPAC) scheme with a large crosswind disturbance. Moreover, when the UAV is subject to interference during reconnaissance, aerial photography, and landing missions, the conventional scheme cannot provide both attitude stability and track accuracy. First, a direct thrust vectoring control (DTVC) scheme is proposed. The control authority of the rotor tilt mechanism was added to enable the decoupling of the attitude and trajectory and to improve the response rate and response bandwidth of the flight trajectory. Second, considering the problems of strong couplings and parameter uncertainties and the nonlinear features and mismatched perturbations that are inevitable in the tilt-rotor, we designed a robust UAV controller based on the backstepping sliding mode control method and determined the stability of the control system through the Lyapunov function. Finally, in the case of crosswire interference during vertical takeoff and landing and the aerial photography missions of the UAV, the numerical simulation of the CPAC scheme and the DTVC scheme was carried out, respectively, and the Monte Carlo random test method was introduced to conduct the statistical test of the landing accuracy. The simulation results show that the DTVC scheme improves the landing accuracy and speed compared to the CAPC scheme and decouples the position control loop from the attitude control loop, finally enabling the UAV to complete the flight control in the VTOL phase.

Modeling and Control of an Aerial Flight Platform Using for Fixed-Wing UAV Landing.

Integral Backstepping-based Nonlinear Flight Control Strategy for Quadrotor Aerial Robot with Unknown Mass

Vertical Modeling and Autonomous Landing of a Mini Unmanned Helicopter

Landing a quadrotor UAV on a moving platform with sway motion using robust control

Lifting-wing Quadcopter Modeling and Unified Control

Low-Complexity Control for Vision-based Landing of Quadrotor UAV on Unknown Moving Platform

Research on Aerial Autonomous Docking and Landing Technology of Dual Multi-Rotor UAV

A nonlinear model predictive control based control method to quadrotor landing on moving platform

Landing control of a quadrotor on a moving platform with unknown speed in the field of view

Modeling and Control of PADUAV: a Passively Articulated Dual UAVs Platform for Aerial Manipulation*

Precision Landing of Unmanned Aerial Vehicle under Wind Disturbance Using Derivative Sliding Mode Nonlinear Disturbance Observer-Based Control Method

Vision-based control for landing an aerial vehicle on a marine vessel

Autonomous Landing of Quadrotor Unmanned Aerial Vehicles Based on Multi-Level Marker and Linear Active Disturbance Reject Control

Autonomous Landing of Quadrotor Based on Ground Effect Modelling

Modeling and control of a class of urban air mobility tiltrotor aircraft

Underwater motions analysis and control of a coupling-tiltable unmanned aerial-aquatic quadrotor

Modeling and Simulation for Multi-Rotor Fixed-Wing UAV Based on Multibody Dynamics

Longitudinal Attitude Control and Stability Analysis for a Low Aspect Ratio Flying Wing UAV at High Angle of Attack

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Thrust Vectoring Control of a Novel Tilt-Rotor UAV Based on Backstepping Sliding Model Method

Towards Non-Robocentric Dynamic Landing of Quadrotor UAVs