Abstract:Train length status reflects whether the carriage is uncoupled or thrown away, it directly affects the safety and efficiency of train operations. At present, satellite positioning technology is used within a train length monitoring system. Such a system can ensure positioning accuracy while reducing the need for trackside equipment. For train length monitoring using GNSS technology, multi-constellation can utilize more visible satellites and achieve better spatial geometric distribution. A robust train length calculation method using multi-constellation GNSS moving-baseline positioning resolution is proposed. The time and space coordinate systems of the Global Positioning System (GPS) and BeiDou Navigation Satellite System (BDS) are unified as the foundation to realize multi-constellation positioning. Double-differenced carrier phase measurements are used to mitigate or eliminate the propagation errors and the satellite and receiver clock errors. Then, the moving-baseline length can be estimated using a Kalman filtering algorithm, and the carrier phase ambiguity terms are fixed using an online ambiguity fix algorithm to further improve the system performance. More measurements are utilized in the multi-constellation train length calculation method, the probability of fault measurement would be increased thereafter, and thus, the fault identification and adaptive filtering algorithm is introduced in the multi-constellation train length calculation to reduce the influence of fault measurement on the accuracy of moving-baseline solution and enhance the robustness of the system. To evaluate the performance of the proposed system, an experiment was conducted on the Beijing-Shenyang high-speed railway line. The results obtained on GPS-FLOAT, GPS-FIX, GPS/BDS-FLOAT, and GPS/BDS-FIX modes were compared. Both the FLOAT and FIX solutions can achieve the train length computation with sub-meter level accuracy, which can prove that the system is able to be adapt to the different GNSS signal conditions. The GPS/BDS-FIX solution can achieve train length accuracy with RMS of 0.155 m, which is better than the other three solutions. In addition, the moving-baseline accuracy is further improved after the adaptive filtering algorithm is added to smooth the noise interference, which had the best performance with RMS of 0.077 m compared with the non-adaptive filtering solutions. The superiority of the adaptive filtering algorithm is verified via using the dataset including two types of random fault measurements. It is proved that the random faults can be tolerated using adaptive filtering algorithm. The effectiveness and superiority of proposed robust train monitoring system are confirmed via comparison of results and simulation of different scenes.

High-speed Railway Track Regularity Data Fusion Algorithm Based on Kalman Filter and Kalman-RTS Smoother

Railway irregularity measuring using Rauch–Tung–Striebel smoothed multi-sensors fusion system: quad-GNSS PPP, IMU, odometer, and track gauge

An Automated System for Position Monitoring and Correction of Chord-Based Rail Corrugation Measuring Points

A Long-focus Camera and Telemetry LiDAR Calibration for Rapid Transit Equipment.

Multisensor Fusion for Railway Irregularity Inspection System: Integration of RTK GNSS, MEMS IMU, Odometer, and Laser

High-Speed Railway Track Comprehensive Measurement System Based on GNSS/INS Multi-sensor

High-speed Railway Track Integrated Inspecting by GNSS-INS Multisensor.

Railway Track Irregularity Measuring by GNSS/INS Integration: Chen et al.: Railway Track Irregularity by GNSS/INS

On-Board Detection of Longitudinal Track Irregularity Via Axle Box Acceleration in HSR

Track geometry estimation from vehicle–body acceleration for high-speed railway using deep learning technique

Estimation of Vertical Track Irregularity Based on Extended Kalman Filter

Estimation of lateral track irregularity through Kalman filtering techniques

A Comprehensive Detection System for Track Geometry Using Fused Vision and Inertia

Railway Track Irregularity Measuring by GNSS/INS Integration

Speed Measurement Error Reduction Via Adaptive Strong Tracking Kalman Filters

Gradient Descent Based Restoration Method of Track Irregularity in Asymmetric Chord Reference Method

Inertial Measurement System For Track Alignment Inspection Based On Machine Vision

Robust train length calculation and monitoring method using GNSS multi-constellation moving-baseline positioning resolution

Height deviation detection of rail bearing platform on high-speed railway track slab based on digital image correlation

Experimental measurement of track irregularities in EMS maglev systems using the mid-chord offset method and inverse filtering technology

DFFRLS-FAUKF: Accurate and reliable monorail longitudinal slope identification method