Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Hybrid Bayesian-Copula-based Risk Assessment for Tall Buildings Subject to Wind Loads Considering Various Uncertainties

Hybrid Bayesian-Copula-based damage probability estimation for steel-concrete composite tall buildings under concurrent seismic and wind loads

Probabilistic assessment of vibration exceedance for a full-scale tall building under typhoon conditions

Wind-induced Stochastic Response of Controlled Tall Buildings by Complex-Mode Analysis

Practical Analysis of Wind-Induced Human Comfort Condition of Tall Buildings

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

Development of joint probability distribution of wind speed and direction using long-term monitoring data

Reliability Analysis of High Rise Building Considering Wind Load Uncertainty

Probabilistic Method for Wind Speed Prediction and Statistics Distribution Inference Based on SHM Data-Driven

Dynamic Wind Load Combination for a Tall Building Based on Copula Functions

Statistical Evaluation of Wind Properties Based on Long-Term Monitoring Data

Risk-averse design of tall buildings for uncertain wind conditions

SHM-based Probabilistic Representation of Wind Properties:Statistical Analysis and Bivariate Modeling

Uncertainty in the dynamic properties of tall buildings and propagation to the wind‐induced response

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Stochastic response estimation of wind-excited structures with multiple uncertain parameters

Model-Selection Uncertainty Quantifications in HFFB Dynamic Analyses of a Complex Tall Building

SHM-based Probabilistic Representation of Wind Properties: Bayesian Inference and Model Optimization

An Innovative Method for Wind Load Estimation in High-Rise Buildings Based on Green's Function

Multivariate probability analysis of wind-wave actions on offshore wind turbine via copula-based analysis

A neural network surrogate model for the performance assessment of a vertical structure subjected to non-stationary, tornadic wind loads