Abstract:Biomass pyrolysis for oil production results in biochar byproduct, whose characteristics can be improved by the reuse of waste plastics. While the plastic recycling process leads to a large amount of plastic waste that cannot be reused, this underutilized feedstock holds the potential for coprocessing with biomass, thereby increasing the likelihood of producing valuable biochar products. This study sought to evaluate how the inclusion of plastic waste influences the pyrolysis of biomass residue. To this end, sawdust and hardwood biomass were chosen as materials to investigate how the presence of plastics might alter the properties of the resulting chars. Synergies were observed among the biomass components, particularly in samples with higher lignin content from hardwood biomass, which resulted in increased biochar yields. The results showed that a 20% blend of plastic waste with wood at 300°C produced a solid char with a yield of 40% by weight. Co-pyrolysis of the biochar derived from blends of 20 wt. % PP with both sawdust and hardwood resulted in significant enhancement of various properties of the resulting biochar, including surface area, carbon content, hydrophobicity, and aromaticity. This enhancement had a favorable effect on the carbon content and calorific values of the biochar. These enhanced properties significantly contributed to the biochar's capacity for sorbing substances like various heavy metals. It can be proved that this result showed the importance of the energy content of biochar and its potential use for renewable applications. The beneficial combined effect seen in the plastic blends can be credited to the interaction between the biomass and polymer components, resulting in the production of fewer volatile products at higher temperatures. It can be suggested that biochar from biowaste and plastic waste not only reduces environmental impact but also converts it into a valuable and eco-friendly product.

Catalytic Pyrolysis of Polypropylene Plastics and Product Properties with Fe-loaded Sludge Biochar

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Effect of co-pyrolysis of sewage sludge with different plastics on the nitrogen, sulfur, and chlorine releasing characteristics and the heavy metals ecological risk of biochar

Polypropylene Pyrolysis and Steam Reforming over Fe-based Catalyst Supported on Activated Carbon for the Production of Hydrogen-Rich Syngas

Effect of ZnCl2-activated Biochar on Catalytic Pyrolysis of Mixed Waste Plastics for Producing Aromatic-Enriched Oil.

Hydrogen-rich syngas production by catalytic cracking of polypropylene over activated carbon based monometallic and bimetallic Fe/Ni catalysts

The synergistic pyrolysis effects of polyethylene terephthalate with the additive of sewage sludge

Catalytic Pyrolysis of Polyethylene and Polypropylene Over Y Zeolite

Pyrolysis municipal sludge char supported Fe/Ni catalysts for catalytic reforming of tar model compound

Producing Aromatic-Enriched Oil from Mixed Plastics Using Activated Biochar As Catalyst

Enhanced biofuel production by co-pyrolysis of distiller's grains and waste plastics: A quantitative appraisal of kinetic behaviors and product characteristics

Study on the kinetics of catalytic pyrolysis of single and mixed waste plastics by spent FCC catalyst

Co-pyrolysis of Sewage Sludge with Hydrogen-Rich Polythene: Effects on Synergistic Promotion and Bio-Oil Quality

Pyrolysis behavior of sewage sludge coexisted with microplastics: Kinetics, mechanism, and product characteristics

Enhanced Biochar Production via Co-Pyrolysis of Biomass Residual with Plastic Waste after Recycling Process

Catalytic co-pyrolysis of poplar tree and polystyrene with HZSM-5 and Fe/HZSM-5 for production of light aromatic hydrocarbons

Catalytic Pyrolysis of Waste Plastics over Industrial Organic Solid-Waste-Derived Activated Carbon: Impacts of Activation Agents

Selective Production of Aromatics from Waste Plastic Pyrolysis by Using Sewage Sludge Derived Char Catalyst

Enhancing light fuel production through catalytic pyrolysis of municipal mixed plastic waste over activated spent FCC catalyst

Fast catalytic pyrolysis of sewage sludge to produce aromatic hydrocarbons and olefins

Influence of the Ratio of Fe/Al2O3 on Waste Polypropylene Pyrolysis for High Value-Added Products