Measurement and Analysis of Deep Foundation Pit Excavation of Adjacent Shield Tunnel with Servo Steel Support

WEI Gang,FENG Feifan,ZHU Jiaxuan,LI Jin,ZHANG Xiongjian,CHEN Chunlai
DOI: https://doi.org/10.13577/j.jnd.2023.0111
2023-01-01
Abstract:As a new support system, the steel-braced axial force servo system is gradually applied to the adjacent subway tunnel, the complex surrounding environment and the deep foundation pit that need to be protected. Based on the field monitoring data of a subway ultra-deep foundation pit in Hangzhou, the control of deformation characteristics of foundation pit excavation and adjacent subway tunnel by steel braced axial force servo system was studied. The results show that the application of steel bracing axial force servo system can reduce the final displacement of the foundation pit retaining structure by 63%, and it can play the role of roof back retaining structure in the construction stage of underground structure. The additional load generated by the adjacent new building has a significant effect on the envelope structure. Under this condition, the axial force control of steel support axial force servo system has high requirements. The maximum horizontal displacement of the general foundation pit retaining structure is near the excavation face. The application of servo steel bracing will increase the depth by about 3~5 m, so it is impossible to control it directly and effectively. Temperature is the most important factor affecting the axial force of servo steel support, and the axial force of servo steel support will increase about 20 kN with the increase of 1 ℃. The excavation surface of this foundation pit project is located below the tunnel. The horizontal and vertical displacements of the tunnel change from foundation pit excavation to underground construction. The overall deformation pattern is "horizontal stretching, vertical contraction". According to the measured data and previous studies, the prediction formula of tunnel horizontal displacement under servo support control is obtained.
What problem does this paper attempt to address?