Abstract:The pre-peak microstructure evolution of the material is crucial in determining the strength and failure scheme of the material, but is not captured by the existing shear strength parameters models which focus on post-peak stage information. Novel concepts of pseudo-cohesion and pseudo-internal friction angle that account for both the pre-peak and post-peak stage information were proposed in this study, based on the experimentally observed response of the rock mechanics parameters to an external load (the maximum principal stress). These two parameters were analytically derived as functions of maximum principal strain, with coefficients to be determined (i.e., by applying the Mohr–Coulomb criterion with these parameters to experimental data). The dependence of pseudo-cohesion and pseudo-internal friction angle on the axial strain and confining pressure was investigated. The evolution of the strength parameters was found to relate to the propagation of micro-crack developed in the loading process, as revealed by PFC 2D simulations reproducing experiments. The results show that (1) analytical model characterizing the pseudo-cohesion and internal friction angle as the quadratic function of axial strain accurately reflects the mechanical response characteristics of the specimen; (2) before the residual stage, the pseudo-cohesion first increases and then decreases with increasing strain, while the pseudo-internal friction angle increases continuously; (3) for the sandstone specimens studied, the pseudo-cohesion at the peak stress increases by a gradually decreasing rate with increasing confining pressure, while the pseudo-internal friction angle at the peak stress decreases by a decreasing rate with the increasing confining pressure; (4) CPM well characterized the mechanical properties of rock under multiple confining pressures, as the total stress–strain curves and failure modes of numerical specimens reproduced the experimental results. The evolution of rock pseudo-shear strength parameters is closely related to the external load and the generation, propagation, and penetration process of rock cracks. The rock pseudo-shear strength parameters are gradually mobilized with the increasing load, and the propagating of cracks owing to the decrease of mobilizable maximum cohesion and the increase of mobilizable maximum internal friction angle.

Shear Mechanical Properties and Failure Modes of Rock with V-shaped Intersecting Double-Cracks

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Research on direct shear test of rock-like materials with two closed pre-existing cracks of different attitudes

Shear Mechanical Responses and Cracking Evolution Mechanisms of Flawed Sandstone Containing Two Circular Holes

Mechanical Behaviours of Sandstone Containing Intersecting Fissures under Uniaxial Compression

Shear Failure Mechanisms of Sandstone Subjected to Direct, True Triaxial and Confining Shear Test Conditions

Study on Shear Failure Behavior of Embedded Cracks Subjected to Different Normal Stresses

Numerical Study of the Strength and Characteristics of Sandstone Samples with Combined Double Hole and Double Fissure Defects

Tensile mechanical properties and fracture evolution characteristics of sandstone containing parallel pre-cracks under dynamic loading

Experimental Investigation on Shear Mechanical Behavior of Sandstone Containing a Pre-existing Flaw Under Unloading Normal Stress with Constant Shear Stress

Experimental and Numerical Investigation on the Dynamic Shear Failure Mechanism of Sandstone Using Short Beam Compression Specimen

Experimental And Numerical Study On Strength And Deformation Behaviors Of Sandstone With Intersecting Flaws

Experimental and numerical study on the mechanical behaviors and crack propagation of sandstone containing two parallel fissures

Numerical Study on Cracking Behavior and Fracture Failure Mechanism of Fractured Rocks under Shear Loading

Simulation of Rock Crack Propagation and Failure Behavior Based on a Mixed Failure Model with SPH

Analysis of mesoscopic cracking propagation and coalescence mechanisms of rocks subject to shearing

Shear Damage Simulations of Rock Masses Containing Fissure-Holes Using an Improved SPH Method

Numerical Study on Breakage and Shear Behavior of Intermittent Rock Joints

Relation Between Crack Propagation and Internal Damage in Sandstone During Shear Failure

A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstone

Numerical study on shear failure of jointed rock with several flaws under shear testing