Abstract:The uniform, rapid, and steady multi-jetting of nanofibers is the key to applying electrospinning technology in mass production. This paper aims to study an air-assisted multi-jet electrospinning method with a curvedly arranged multi-spinneret that can steadily and continuously produce nanofibers. An electrospinning device with a multi-spinneret which utilizes air flow to stretch and constrain jets is developed. The spinnerets are curvedly arranged in a 5 × 5 array, which can reduce the electric field interference between them. The air flow is guided through the gas hood and evenly distributed around each spinneret to form sheath layers, which mitigates the electric field interference between the spinnerets by reducing surface charge density of the jets and which stretches and constrains the jet, improving jetting stability and continuity. The influences of the electric field strength and the collection distance on jet ejection and deposition behavior are studied, and the influence of auxiliary air pressure on jet ejection initiation is also analyzed. The results show that the critical voltage of jet ejection of the central spinnerets is reduced from 8.2 kV to 3.4 kV when the auxiliary air pressure is increased from 0 kPa to 50 kPa, that of the inner spinnerets is reduced from 9.1 kV to 4.0 kV, and that of the outer spinnerets is reduced from 13.1 kV to 5.2 kV. The critical voltage of the outer spinnerets is higher than that of the inner spinnerets, and the critical voltage of the spinnerets in the center is the lowest. The design and development of the multi-spinneret curvedly arranged in a 5 × 5 array and the introduction of sheath air flow provide an effective means for uniform, rapid, and steady multi-jetting of nanofibers, which is beneficial in promoting the use of electrospinning technology in mass production applications.

Direct Writing of Three-Dimensional Spiral Structure by Electrospinning with Double Tips

High-aspect-ratio Three-Dimensional Electrospinning Via a Tip Guiding Electrode

In-situ Molding of Micro Three-Dimensional Columnar Structure by Electric-Field-focused Electrospinning

Free Liquid Surface Electrospinning Using a Spiral Tip for Large-Scale Nanofiber Production

Direct-Write, Self-Aligned Electrospinning on Paper for Controllable Fabrication of Three-Dimensional Structures.

Electrohydrodynamic direct-writing of three-dimensional multi-loop nanofibrous coils

2D and 3D Electrospinning of Nanofibrous Structures by Far-Field Jet Writing

Highly Efficient Air-Assisted Multi-Jet Electrospinning with Curved Arranged Spinnerets

Electrospinning of micro spiral fibers

Fabrication of three-dimensional nanofibrous macrostructures by electrospinning

High-Throughput and Controllable Fabrication of Helical Microfibers by Hydrodynamically Focusing Flow.

Direct-writing organic three-dimensional nanofibrous structure

The fabrication of a micro-spiral structure using EDM deposition in the air

Electrospinning of Three-Dimensional Nanofibrous Tubes with Controllable Architectures.

Bioinspired Helical Microfibers from Microfluidics

Arced Multi-Nozzle Electrospinning Spinneret for High-Throughput Production of Nanofibers

Multi Spinnerets Electrospinning with Assistant Sheath Gas

Electrospinning From The Edge Of An Array Of Cascade Rotating Disks

Micro/Nano-Structure Direct-Write Technology Based on Near-Field Electrospinning

Electrohydrodynamic Direct Writing Platform Based on Near-Field Electrospinning

Stable Multi-Jet Electrospinning with High Throughput Using the Bead Structure Nozzle