Abstract:The characteristics of geotechnical engineering related structure such as tunnels, foundations and retaining walls are as follows: (1) The structure is normally buried underground and visual inspection of the health condition is not possible in most cases. (2) Due to the complicated geological and hydrological conditions, a number of uncertainties are involved in the design and construction of geotechnical structures. (3) Some of the geotechnical structures are super long and large. Therefore, the requirements of real-time and long-distance monitoring of these geo-structures are of great importance. Some key geo-structures such as large-span tunnel, underground facilities and foundations require the measurement accuracy in the order of micron or millimeter. Hence the conventional monitoring techniques cannot meet the demands for geo-structure health monitoring.Brilliouin Optical Time Domain Reflectometry/Analysis (BOTDR/A) is a fully distributed measurement technique, which utilizes Brilliouin spectroscopy and Optical Time Domain Reflectometer/Analyzer to measure strains generated in optical fibers as distributed in the longitudinal direction. Fiber Bragg Grating (FBG) is a qusai-distributed monitoring technique, which is a type of distributed Bragg reflector constructed in a short segment of optical fiber that reflects particular wavelengths of light and transmits all others. The reflected wavelength is proportional to the applied strain and temperature and the FBG sensor can therefore be used as a strain or temperature sensor. Because of the distinctive characteristics of the distributed optical fiber sensing technologies, they have been paid more and more attention and began to be used to construct monitoring systems of various geo-structures such as tunnels, embankments and soil nailed slopes. In this paper, the operation principles and merits of BOTDR/A and FBG are introduced; their application feasibility on the geo-structure health monitoring are analyzed based on the authors' research achievements and application cases; the related topics about application of BOTDR/A and FBG are discussed in detail, which include the installation methods of optical fiber, the impact of distance, temperature and humidity resolution on measurement results, the fatigue effect of optical fiber, the conversion from strain to deformation and the establishment of intelligent monitoring system. The research results show that the distributed optical fiber sensing technologies are quite applicable to the geo-structure health monitoring.

Temperature and Strain Decoupling Method Based on BOTDA and ROTDR

Temperature Online Monitoring of Submarine Cable Based on BOTDA and FOCT

Temperature Monitoring for 500 kV Oil-Filled Submarine Cable Based on BOTDA Distributed Optical Fiber Sensing Technology: Method and Application

Onshore Simulation Test Setup for Temperature and Strain Sensing of Submarine Cable based on BOTDA

The Use of BOTDR to Evaluate the Thermal Effects on Fiber Residual Strain of Optical Fiber Cables

Research on Temperature Compensation Technology of BOTDR Strain Monitoring

STUDY ON BOTDR-BASED DISTRIBUTED OPTICAL FIBER STRAIN MEASUREMENT FOR TUNNEL HEALTH DIAGNOSIS

Temperature Monitoring and Electrical Fault Warning Methods of Three-Core Submarine Cables

A Demodulation Method for a Raman Optical Time Domain Reflectometer Suitable for Laid Optical Cables

Enhanced C-OTDR-Based Online Monitoring Scheme for Long-Distance Submarine Cables

Research on the Temperature Compensation Technology of Quasi-Distributed Fiber Bragg Grating

BOTDR Optic Fiber Temperature Monitoring Technique and Its Application in Civil Engineering

Research on Submarine Cable Anchor Damage Monitoring Technology Based on a Hybrid Brillouin and Rayleigh Distributed Sensing System

Design of Remote Monitoring System of Under-Sea Cable Strain Status

Stain monitoring for tunnel using distributed optical fiber BOTDR sensors

Research on BOTDR Sensing Technique in Structural Health Monitoring

Application of Distributed Optical Fiber Strain Measurement into Geotechnical Engineering Monitoring

Advanced Fiber Optic Sensing for Cryogenic Simultaneous Temperature and Strain Measurement

Hybrid B-OTDR/Φ-OTDR for Multi-Parameter Measurement from a Single End of Fiber

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement