Abstract:In order to solve the problem that temperature sensor laying is complex and maintenance cost is high in the large-scale, multi-point real-time temperature monitoring process, the temperature monitoring system based on Fiber Bragg Grating was designed and developed. Using wavelength selectivity by optical fiber diffraction grating, a function of temperature and wavelength was established. Temperature of the measured position was inversed by calculating the wavelength variation through the optical fiber Bragg grating. Due to environmental, materials and other factors, the spectral distribution and temperature changes do not satisfy linear relationship. Therefore, designed the spectrum correction algorithm was designed, and function curve fitting of wavelength and temperature was completed with a degree of fitting greater than 99.7%. Experiments used FB136L-IAC-proof oven, LPT-200 diode, and 1 550 nm optical fiber to detect 20 to 280 degrees C temperature range of multi-point in real-time. The results show that when the temperature is changed by 1 degrees C, the corresponding center wavelength shifts about 0.04 nm to longer wavelengths. Compared with the test data from standard device, the error is less than +/- 0.3 degrees C. Meanwhile, the spectral correction algorithm was applied to the system to further improve the uniformity and accuracy of the temperature detection. Because the system uses fiber-optic sensor network, it has a strong anti-electromagnetic interference capability. The diffraction grating can achieve precise measurements, so it has big dynamic range and high accuracy. The innovation of the system is to ensure high-precision measurements, while still satisfy large-scale, multi-point, high anti-jamming capability of rapid laying, and has a strong practical value.

Research on the Temperature Compensation Technology of Quasi-Distributed Fiber Bragg Grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Research on Temperature Compensation Technology of BOTDR Strain Monitoring

Fiber Bragg grating temperature sensor for marine application

A Hybrid Raman/FBG Sensing System for Simultaneous Measurement of Temperature and Strain

A Novel Fiberg Grating Sensing and Demodulating System with Temperature Compensation

Research on the Temperature Compensation of Optical Fiber Displacement Sensor Based on Multisensor Data Fusion.

Time Division Multiplexing of FBG Sensor System

Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

Temperature and Strain Decoupling Method Based on BOTDA and ROTDR

Integrated Real-Time Monitoring System for Strain/Temperature Distribution Based on Simultaneous Wavelength and Time Division Multiplexing Technique

Cantilever vibration sensor based on Fiber Bragg Grating temperature compensation

Quasi-Distributed Temperature Sensing Using Apodized Fiber Bragg Grating Array

[Research on spectrum correction algorithm of temperature measurement system based on FBG]

Temperature Compensation in Strain Measurement Using Erbium-doped Fluorescent Fiber Gratings

A New Designed FBG and Φ-OTDR Hybrid System for Vibration and Temperature Sensing

Study on FBG Coupling Effects and Absolute Temperature Compensation Technique Based on Long-term Monitoring Data

Optical low-coherence reflectometry for a distributed sensor array of fiber Bragg gratings

Measurement and Analysis of Soil Temperature Field Based on Fiber Bragg Grating Sensor Array

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

A diaphragm-type fiber Bragg grating pressure sensor with temperature compensation