Abstract:Activated carbons (ACs) are derived from cornhusk via a simple technique route consisting of a hydrothermal carbonization and a following KOH activation, with porous structures and morphology of the ACs controlled by adjusting the amount of KOH for the activation. As the main active materials of the electrode for supercapacitors (SCs), both the porosity and morphology exhibit significant influence in the compaction density of the electrode. The ACs activated with a KOH/biochar ratio of 3:1 not only provide high surface area of 3024 m2/g but also guarantee high compaction density of 11.6 mg/cm2 for a 200 μm‐thick electrode, leading to high‐performances for both gravimetric and volumetric capacitance. Moreover, the morphology of thin‐sheet‐like interconnected network benefits the densely‐compact of the ACs in electrode. In the concern of practical application, the effect of electrode thickness on the electrochemical performances are examined to optimize the electrode with commercial‐level mass loading with organic electrolyte, which is of ∽344 F/g in gravimetric capacitance and 210 F/cm3 in volumetric capacitance as well as excellent capacitance retention over 90% after 5000 galvanostatic charge‐discharge cycles. In addition, good electrochemical performances of the optimized electrode with commercial‐level mass loading maintains over a broad range of work temperature. This article is protected by copyright. All rights reserved.

Filling Macro/mesoporosity of Commercial Activated Carbon Enables Superior Volumetric Supercapacitor Performances

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Activated‐carbon‐based supercapacitors with high gravimetric‐ and volumetric capacitance at commercial‐level mass loading

Pore-structure Regulation and Heteroatom Doping of Activated Carbon for Supercapacitors with Excellent Rate Performance and Power Density

Optimized Mesopores Enabling Enhanced Rate Performance in Novel Ultrahigh Surface Area Meso-/Microporous Carbon for Supercapacitors

A high-performance supercapacitor based on activated carbon fibers with an optimized pore structure and oxygen-containing functional groups

Nanocarbon of Moderate Microporosity Doped with Oxygenate Redox Pairs to Achieve Superior Gravimetic/volumetric Supercapacitor Performances

Graphitic porous carbon with multiple structural merits for high-performance organic supercapacitor

Enabling high surface and space utilization of activated carbon for supercapacitors by homogeneous activation

Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors

Enhancing the pore wettability of coal-based porous carbon as electrode materials for high performance supercapacitors

Coupled Ultrasonication-Milling Synthesis of Hierarchically Porous Carbon for High-Performance Supercapacitor.

Large-surface-area activated carbon with high density by electrostatic densification for supercapacitor electrodes

Ultrafast pore-tailoring of dense microporous carbon for high volumetric performance supercapacitors in organic electrolyte

Controlling and optimizing the morphology and microstructure of 3D interconnected activated carbons for high performance supercapacitors

High-performance supercapacitor electrode at commercial-level mass loading from N-enriched activated carbon derived from soybean dregs

Synthesis of activated carbon nanospheres with hierarchical porous structure for high volumetric performance supercapacitors

Influence of pore structure on the electrochemical performance of activated carbon as electrode material for aqueous supercapacitors

Ion Intercalation into Graphitic Carbon with a Low Surface Area for High Energy Density Supercapacitors

Bisphenol A Epoxy Resin-Derived Activated Carbon with High Performance for Supercapacitors

High‐performance activated carbons for supercapacitor: Effects of porous structures, heteroatom doping, and morphology