Abstract:Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr3) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr3/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr3 solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution's stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr3 on GaAs. Compared to the pristine MAPbBr3, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr3 polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10-8 A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 1010 and 1 × 1011 Jones at -1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors.

Extrinsic Photoresponse of Ag Doped MAPbBr3 Perovskite Crystals

Extrinsic photoresponse of Ag doped MAPbBr 3 perovskite crystals

Variational hysteresis and photoresponse behavior of MAPb<i>X</i><sub>3</sub> (<i>X</i> = I, Br, Cl) perovskite single crystals

In situ NMR Investigation of the Photoresponse of Perovskite Crystal

Photoresponse of Bulk Single Crystal Perovskite CH3NH3PbBr3 with Below Bandgap Light Excitation

Frequency- and Power-Dependent Photoresponse of a Perovskite Photodetector Down to the Single-Photon Level.

Strongly Enhanced Photoluminescence and Photoconductivity in Erbium-Doped MAPbBr3 Single Crystals

Tuning Photodetection Band of MAPbX3(X=Cl/Br/I) Perovskite Single Crystals by Sub-nano Carbon Dot Doping

Solution-processed MAPbI 3 /Cs 2 AgBiBr 6 heterostructure through epitaxial growth for broadband photo-detection

Perovskite Photodetectors Based on p-i-n Junction With Epitaxial Electron-Blocking Layers

Ultrafast Spectroscopy of Photoexcitations in Organometal Trihalide Perovskites

Near‐Infrared Photoresponse of One‐Sided Abrupt MAPbI<sub>3</sub>/TiO<sub>2</sub> Heterojunction through a Tunneling Process

Near-Infrared Photoresponse of One-Sided Abrupt MAPbI3/TiO2 Heterojunction through a Tunneling Process

Enabling Fast Photoresponse in Hybrid Perovskite/MoS2 Photodetectors by Separating Local Photocharge Generation and Recombination

Enabling Fast Photoresponse in Hybrid Perovskite/MoS 2 Photodetectors by Separating Local Photocharge Generation and Recombination

Optimized Photoelectric Characteristics of Mapbcl3 and Mapbbr3 Composite Perovskite Single Crystal Heterojunction Photodetector

Physical Properties of an Efficient MAPbBr3/GaAs Hybrid Heterostructure for Visible/Near-Infrared Detectors

X-ray Scintillation in Lead Halide Perovskite Crystals

Bismuth-doping induced red-shifted spectral response of homo-epitaxial MAPbBr3 photodiodes

Efficient Photodiode-Type Photodetectors with Perovskite Thin Films Derived from an MAPbI3 Single-Crystal Precursor

Broadband Extrinsic Self‐Trapped Exciton Emission in Sn‐Doped 2D Lead‐Halide Perovskites