Experimental Investigation of Improved Tolerance for Concentration Mismatch in Potassium Isotope Analysis on a Hexapole Collision Cell MC-ICP-MS (nu Sapphire)

Wenjun Li,Ye Zhao,Benxun Su,Bingyu Gao,Jing Wang,Shanke Liu

DOI: https://doi.org/10.1039/d3ja00022b

2023-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Effect of K concentration mismatch up to 30% on δ 41 K value from RF Ref. of 1.05 V.

What problem does this paper attempt to address?

Precise measurement of stable potassium isotope ratios using a single focusing collision cell multi-collector ICP-MS

Weiqiang Li,Brian L. Beard,Shilei Li

DOI: https://doi.org/10.1039/C5JA00487J

2016-01-01

Journal of Analytical Atomic Spectrometry

Abstract:High precision potassium isotope ratio measurements were made using a collision-cell equipped single focusing Multi-Collector Inductively Coupled Plasma Mass Spectrometer (MC-ICP-MS). Interferences on 41K from 40ArH+ were largely suppressed through collision with He gas atoms, and reaction with H2 or D2 gas molecules in the collision cell under optimum collision gas flow conditions. Using H2 or D2 as the collision gas, we distinguish charged argon–deuterium molecules (ArD+) generated in the collision cell from argon hydride (ArH+) generated in the plasma or in the interface region (referred to as “plasma-related AH+” hereafter), and demonstrate, for the first time, that both plasma-related and collision cell-generated ArH+ are important sources of ArH+ that interfere with 41K+ in collision-cell ICP-MS instruments that use H2 as a collision gas. The use of D2 instead of H2 as a reactive gas in the collision cell resulted in better overall performance in K isotope ratio measurements. By combining these mass spectrometry methods with chemical purification of K by ion exchange chromatography, we achieved an internal precision of u003c±0.07‰ (2 standard error) and an external reproducibility of u003c±0.21‰ (2 standard deviation, or 95% confidence) in the 41K/39K ratio measurement for geological and biological samples. With the improved precision, it is possible to distinguish a ∼1.3‰ variation in K isotope compositions (41K/39K ratios) among seawater, igneous rocks, and biological samples. The K isotope system is likely to be beneficial in providing a better understanding of potassium cycling during continental weathering and the uptake of nutrients by plants.
Author Response for "application of a “continuous‐acquisition‐method” to Potassium Isotope Measurement by Multi‐collector Inductively Coupled Plasma Mass Spectrometry"

Hai-Ou Gu,He Sun,Chao Huang,Fangyue Wang,Can Ge

DOI: https://doi.org/10.1002/rcm.9105

2021-01-01

Abstract:RationaleThe very small mass difference between 41K and 40ArH+ makes the flat, hydride interference‐free peak shoulders very narrow (0.002–0.003 m/z unit), bringing a number of analytical challenges when measuring K isotopic compositions by multi‐collector inductively coupled plasma mass spectrometry (MC‐ICP‐MS). In traditional Sequence Run mode, the parameters are loaded every line of the sequence which can introduce tiny drifts of tune parameters and mass peaks. This may occasionally lead to the failure of K isotope measurements when mass drifts exceed 0.002 m/z unit. It is thus essential to keep the tune parameters, especially the magnet current, very stable to achieve high‐precision K isotopic compositions.MethodWe developed a “Continuous‐Acquisition‐Method” (CAM) MC‐ICP‐MS Run mode to improve the stability when determining K isotopes. Two sets of experiments were designed: (a) Stability test: measuring a single pure K solution (viz. NIST‐999c) for ~3 h and comparing the stability of the two run modes; and (b) GSB‐K test: measuring our inhouse pure K standard solution (GSB‐K) in both run modes and comparing the accuracy and precision.ResultsThe traditional Sequence Run mode only kept the MC‐ICP‐MS system stable for the first ~1.5 h during the ~3‐h test, with an offset of the mass peaks of ~0.003 m/z unit. The CAM Run mode yielded higher stability during the whole test (~3 h), with a peak shift <0.0004 m/z unit. Measurement of the GSB‐K standard solution in Sequence Run and CAM Run modes gives identical δ41K values when the magnet was kept stable, with the CAM Run mode offering a better precision and keeping the instrument stable for longer time.ConclusionsThe MC‐ICP‐MS CAM Run mode shows higher stability and better precision. It is, therefore, good for high‐precision K isotope measurements.
High precision analysis of potassium stable isotopes using the collision/reaction cell Neoma MC-ICPMS/MS

Nicole Nie,Rosa Grigoryan,François L.H. Tissot

DOI: https://doi.org/10.1039/d4ja00133h

2024-06-20

Journal of Analytical Atomic Spectrometry

Abstract:Potassium isotopes hold great promise for tracing geological processes, but their analyses are fraught with complexities. Various methods using different generations of MC-ICPMS instruments have been developed, each with distinct advantages and disadvantages. In this study, we report on K isotopic measurements performed using the Thermo Scientific Neoma collision cell MC-ICPMS/MS to explore the potential of the instrument. The tests were conducted under wet plasma conditions, and the precision achieved was ~0.03 to 0.1 ‰ (95% c.i.) for 5–25 measurements in a single analytical session, comparable to other established techniques. The measurements were accurate within the tested concentration range of 50–500 ppb K. A K concentration mismatch between samples and standards of up to 5% was acceptable, while acid molarity mismatch had a pronounced effect on the measured K isotopic compositions. Matrix elements did not significantly impact K isotopic measurements when their concentration was below 2% of K. Several geostandards were measured, and the obtained values agree with those from other measurement techniques. Overall, our tests suggest that measuring K isotopes with Neoma collision cell MC-ICPMS/MS is possible, but the high sensitivity of the instrument to tuning settings requires considerable efforts for conducting such measurements.

spectroscopy,chemistry, analytical
Investigation of Nitrogen Addition, Position Effect and Mismatch Intensity Effect in Li Isotopic Analysis by Nanosecond Laser Ablation Multi-Collector Inductively Coupled Plasma Mass Spectrometry

Jie Lin,Yongsheng Liu,Luyun Zhu,Wen Zhang,Zhaochu Hu

DOI: https://doi.org/10.1016/j.sab.2021.106074

IF: 3.662

2021-01-01

Spectrochimica Acta Part B Atomic Spectroscopy

Abstract:The accurate calibration of Li isotope ratio analysis was implemented by a simple and easy-to-operate sample-standard bracketing (SSB) calibration method using nanosecond laser ablation multi-collector inductively coupled plasma mass spectrometry (ns-LA-MC-ICP-MS). The method requires stable instrumental conditions to ensure similar or same mass bias for the sample and the bracketing standard. To stabilize the instrumental conditions and reduce the matrix effect, N-2 was added at 4 ml min(-1) into the central gas, at a cost of 35-42% reduction in intensity of Li-7. Additionally, to reduce the mass bias difference between the sample and the bracketing standard, their positions in the ablation cell and intensity mismatch effect were also evaluated. An offset of up to 5 parts per thousand in delta Li-7 was observed if the sample and standard were too far apart in the laser ablation cell, and our study demonstrated that the position effect was effectively reduced/eliminated when the sample and standard were placed close to each other, or a volume-optional and low-memory (VOLM) cell was applied for analysis. Furthermore, the intensity mismatch effect was evaluated by changing three laser ablation parameters (spot size, energy and repetition rate). To reduce the intensity mismatch effect, Li content of the selected standard should be close to that of sample, and the Li intensity of sample and standard should be matched by adjusting laser repetition rate. According to the investigation of the above influencing factors on the Li isotope ratio measurements, we can optimize an effective analytical scheme of Li isotope for more geological materials using ns-LA-MC-ICP-MS.
Precise Measurement of 41 K/ 39 K Ratios by High-Resolution Multicollector Inductively Coupled Plasma Mass Spectrometry under a Dry and Hot Plasma Setting

Shichao An,Xianglong Luo,Weiqiang Li

DOI: https://doi.org/10.1002/rcm.9289

IF: 2.586

2022-01-01

Rapid Communications in Mass Spectrometry

Abstract:Rationale Stable K isotope geochemistry is becoming an important tool for various applications. Developments in analytical methods for K isotopes based on multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) without collision cell will bring research capability of K isotopes to many existing MC-ICP-MS labs. Methods Stable K isotopes were analyzed without applications of "cold plasma" and collision cell on a Nu 1700 Sapphire high-resolution multicollector inductively coupled plasma mass spectrometer. A conventional dry and hot plasma setting is used for analysis to maintain high K sensitivity and signal stability, and high mass resolution was applied to provide interference-free shoulders of K-39(+) for isotopic measurement of K-41/K-39 ratios. Ar-40(+) ion beam generated in ICP was neutralized in the ion guide rail for the Daly detector. Results Under such operating conditions, an external reproducibility of <+/- 0.1 parts per thousand (2 standard deviation) for K-41/K-39 is achieved for K solutions of 1 ppm or above. Tests were carried out to evaluate the influence of total K loading, K concentration and acid molarity mismatch, matrix effects, and Ar-40(+) and (ArH+)-Ar-40-H-1 tailing on K isotope analysis. We found that the accuracy of K isotope analysis can be compromised by concentration mismatch of sample and standard K, by 0.007 parts per thousand in delta K-41 per 1% mismatch of K content. By contrast, mismatch of HNO3 molarity or existence of HCl in HNO3 exerts negligible influences on the analytical precision and accuracy of K isotope analysis. Furthermore, K isotope analytical results remain accurate when Na/K, Mg/K, Ca/K, Rb/K, V/K, and Cr/K ratios are below 3%. Conclusions The high-precision K isotope analytical method reported here is robust for studies on K isotopic variations in geological, cosmochemical, and biological samples. The f(41)K values of six international geostandards measured using our method are consistent with data measured using different analytical methods from other laboratories.
Copper Isotope Compositions Measured Using a Sapphire Dual Path MC-ICPMS with a Collision/Reaction Cell

Tu-Han Luu,Daniel Peters,Esther Lahoud,Yvan Gérard,Frédéric Moynier

DOI: https://doi.org/10.1021/acs.analchem.3c05192

IF: 7.4

2024-01-06

Analytical Chemistry

Abstract:We present a new approach to Cu isotopic measurements using a state-of-the-art Nu Sapphire multicollector inductively coupled plasma source mass spectrometer equipped with a collision/reaction cell (CRC-MC-ICPMS). We investigate the effects of Na doping and Cu concentration mismatch between bracketing standard and unknown samples and demonstrate the efficacy of introducing a He-H(2) gas mix into the CRC to efficiently eliminate the sample matrix-based ^(40)Ar^(23)Na^(+) isobaric interference on...

chemistry, analytical
High-efficient purification and accurate determination of K isotope using MC-ICP-MS

CHENG Yuan-yuan,LI Guo-nai,LI Yang-zi,DENG Li,HE Mao-yong,LIU Lu-bai-yang,LUO Jia-xin,JIN Zhang-dong

DOI: https://doi.org/10.19658/j.issn.1007-2802.2023.42.002

2023-01-01

Abstract:Potassium（K） is widely applied in earth sciences, biological sciences, environmental sciences and other fields. This study presents a method for high-efficient purification for a variety of samples and high-precision determination for K isotopes by multi-collector inductively coupled plasma mass spectrometry（MC-ICP-MS）. Potassium in digested samples was separated by cation-exchange chromatography with AG 50W-X8 resin, and was eluted by 0.5 mol/L HNO 3 . It’s achieved a high recovery of K with the yield of ＞99.9% and negligible blank（～10 ng K）. Nevertheless, for samples with high contents of matrix elements（Li、Na、Mg、Al、V、Cr、Ca）, two-step purification procedure is suggested. The purified samples were analysed by MC-ICP-MS using "cold plasma-low resolution". The values of δ 41 K of international standards（rock、coal and biology） are consistent with literature, and the long-term precision is better than 0.06‰ with good reproducibility.
Studies on ~(45)sc Background Interference and Treatment in ICP-MS

LU Bing-yuan,QIAO Pei-jun,SHAO Lei

2011-01-01

Abstract:The very higher and unstable background phenomena at 45 U on ICP-MS can be found in many laboratories.In this paper,two form mechanism of the interference were described: one was the normal memory effect on sampling system from the solution matrix(e.g.,C,Ca,Al matrix),which could form the polyatomic interference ions at 45 u;the other one was due to the carbon contamination in the mass system.The carbon deposited on ion lens would react with the hydrogen oxygen ions in the ion beam and then formed the interference species 12C16O21H+.The character of this polyatomic interference ion could be recognized by the kinetic energy discrimination(KED).The most main difference of two mechanisms was the signal of latter,which decayed very slowly with continues washing or sampling process.There was no desired effect by the sampling system cleaning.Benefit from the KED mode,the polyatomic ions interference were suppressed,and the best results could be achieved.The detection limit of 45Sc is less than 1.2 ng/L,the background equivalent concentration(BEC) of 45Sc is less than 16 ng/L.And also,the variability of the data is improved.The Sc analysis results of China national sediment and rock standard reference material(SRM)enter the permitted error range.The internal precision of results is less than 1.5%(RSD)(n=3).The external precision of parallel sample results(n=4) come back to normal level(within 2.3%—5.23%,RSD).A suggestion has be made in this paper,the background signal at 45 U can be used as an indicator of carbon contamination on ion lens.
Potassium isotopic composition of various samples using a dual-path collision cell-capable multiple-collector inductively coupled plasma mass spectrometer, Nu instruments Sapphire

Frédéric Moynier,Yan Hu,Kun Wang,Ye Zhao,Yvan Gérard,Zhengbin Deng,Julien Moureau,Weiqiang Li,Justin I. Simon,Fang-Zhen Teng

DOI: https://doi.org/10.1016/j.chemgeo.2021.120144

IF: 3.9

2021-06-01

Chemical Geology

Abstract:Mass-dependent K isotopic fractionations can be used to trace cosmochemical, geological, and biological processes such as evaporation/condensation, core formation, magmatic processes, weathering, and cellular metabolism. However, the application of stable K isotopes has been limited by major isobaric interferences from Ar, common on conventional multi-collector inductively-coupled-plasma mass-spectrometer (MC-ICP-MS), particularly for the low-K samples. Here, we present a set of high-precision K isotopic data acquired on terrestrial rocks, seawater, as well as a lunar meteorite using the recently released Nu Sapphire™ MC-ICP-MS that utilizes a collision cell to minimize Ar based interferences while maintaining remarkably high K sensitivity (≈ 2000 V/ppm). The influence of several parameters on the precision and accuracy of the K isotopic data has been evaluated, including total K concentration, K intensity mismatch between sample and standard, HNO3 molarity mismatch between sample and standard, and the presence of matrix elements. We found that the Nu Sapphire™ can be used to acquire precise and accurate data using as little as 125 ng of K, which represents an improvement by a factor 10 compared to what has been done on previous instruments. We present data for 23 previously analyzed samples; these data are highly consistent with literature values. On the other hand, accurate measurements are conditioned 1) to the close matching of sample and standard K intensities (a 1% mismatch creates a 0.02‰ offset on the 41K/39K ratio), and 2) to the absence of Ca (a Ca/K ratio of 1% creates a 0.069‰ offset on the 41K/39K ratio). In addition, Rb/K, Na/K, Ti/K and Cr/K ratio should also be maintained under 2.5% to avoid isotopic offset.We confirm the existence of significant mass-dependent K isotopic variations in terrestrial samples and that lunar rocks are isotopically heavier than terrestrial rocks. The incomparable sensitivity offered by the Nu Sapphire opens the possibility for high-precision K isotopic measurements across a wide range of samples for diverse applications.

geochemistry & geophysics
High precision potassium isotope analysis of geological samples using MC-ICP-MS

CHEN Yaqi,SUN He,GU Haiou,HUANG Chao,CAO Ziyi,WANG Fangyue,GE Can

DOI: https://doi.org/10.19762/j.cnki.dizhixuebao.2022032

2023-01-01

Acta Geologica Sinica

Abstract:In recent years, with the rapid development of multi-collector inductively coupled plasma-mass spectrometry（MC-ICP-MS）, the analytical precision of potassium（K） isotopes has been greatly improved, which in turn has promoted their development as potential geochemical tracers in processes involving continental weathering, crust-mantle interaction, and so on. Until now, the cumbersome and time-consuming process of sample pretreatments and the poor analytical accuracy caused by argon hydrides interference are still the biggest obstacles to the wide application of K isotopes. After completely dissolving the samples with hydrochloric acid, nitric acid, and hydrofluoric acid, purification of K from major matrix was performed on a customized quartz ion exchange column packed with ～2.7 mL of AG50W-X8 cation exchange resin（BioRad TM,200～400 mesh） using 0.5 mol/L HNO 3 as the eluent. This one-step procedure can effectively separate K from Li, Na, Ti, Mg, Mn, Al and Ca, except for Cr, in most of the geological samples. To find the appropriate method for high-precision stable K isotopic measurements, for minimizing the ArH + yield and improving the stability of the instrument, three methods were compared here（the high-resolution mode, high-resolution mode with continuous acquisition measurement run mode, and the low-resolution mode with a method designed to eliminate ArH + interference）. The low-resolution mode has the advantages of low cost, high stability, and high precision（long-term precision at about 0.08‰ for our laboratory）. When used to measure the K isotopic composition of a series of international geological reference materials, the results are consistent with previous values within analytical precision, indicating the reliability of this method. The K isotopic composition of a set of Chinese national rock standard materials is determined here. The measured values of K isotopes can provide a reference for the data comparison between different laboratories in future.
Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

Yan Hu,Fang-Zhen Teng

DOI: https://doi.org/10.1039/c8ja00335a

2019-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Analytical advances in Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS) over the past decade have led to rapid growth in studies utilizing non-traditional stable isotopes. There are substantial analytical challenges for achieving precise and accurate measurements of these isotopes that limit their applications in geoscience where natural isotopic variations are generally small. Here, we evaluate experimental factors that may affect the accuracy and repeatability of isotopic measurements of selected stable metal isotopes (Li, Mg, Fe, Cu, and Zn) on a Nu Plasma II MC-ICPMS to provide optimized analytical protocols for acquiring high quality data. Our results suggest that the repeatability level (2SD) that is readily obtainable for delta Li-7 is +/- 0.09 parts per thousand to +/- 0.24 parts per thousand, for delta Mg-26 is +/- 0.03 parts per thousand to +/- 0.07 parts per thousand, for delta Fe-56 is +/- 0.05 parts per thousand to +/- 0.07 parts per thousand, for delta Cu-65 is +/- 0.03 parts per thousand to +/- 0.05 parts per thousand, and for delta Zn-66 is +/- 0.02 parts per thousand to +/- 0.04 parts per thousand. Instrumental mass bias for these isotope systems can be corrected adequately using the standard-sample bracketing method but it requires that target elements are of high purity, a close match in analyte concentrations between samples and bracketing standards, and preparation of all running solutions using the same concentration of nitric acid. Overall, the Nu Plasma II is well suited for precise and accurate analyses of the isotopes studied here, and the optimal results were obtained using a 'wet' plasma operating at a normal radio-frequency (RF) power.
High-precision Analysis of Potassium Isotopes by MC-ICP-MS Without Collision Cell Using Cool Plasma Technique in Low-Resolution Mode

Hai-Ou Gu,He Sun

DOI: https://doi.org/10.1039/d1ja00201e

2021-01-01

Journal of Analytical Atomic Spectrometry

Abstract:A practical method to measure K isotopes with MC-ICP-MS without a collision cell in low-resolution mode.
High-precision Iron Isotopic Measurements in Low Resolution Using Collision Cell (CC)-MC-ICP-MS

Jing Wang,Dong-Mei Tang,Ben-Xun Su,Qing-Han Yuan,Wen-Jun Li,Bing-Yu Gao,Kai-Yun Chen,Zhi-An Bao,Ye Zhao

DOI: https://doi.org/10.1039/d2ja00084a

2022-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Fe isotopic measurements in low resolution mode, using Nu Sapphire CC-MC-ICP-MS.
An optimal separation method for high-precision K isotope analysis by using MC-ICP-MS with a dummy bucket

Xiaoqiang Li,Guilin Han,Qian Zhang,Zhuang Miao

DOI: https://doi.org/10.1039/d0ja00127a

2020-01-01

Journal of Analytical Atomic Spectrometry

Abstract:High-precision potassium isotope analysis by MC-ICP-MS: a novel chromatographic method (single column) and cross-disciplinary research.

spectroscopy,chemistry, analytical
Compensation of isotope ratio mismatch in double isotope dilution inductively coupled plasma mass spectrometry (ID-ICP/MS)

Gizachew Betru Tegegen,Yong-Hyeon Yim,Kyoung-Seok Lee

DOI: https://doi.org/10.1088/1681-7575/ad8928

2024-10-22

Metrologia

Abstract:Exact-matching double isotope dilution inductively coupled plasma mass spectrometry (ID-ICP/MS) is widely used to characterize reference materials (RMs) in elemental analysis. In this technique, achieving exactly matching isotope ratios for the sample and calibration blends is regarded as an important prerequisite for obtaining accurate measurement results. However, meeting this condition requires multiple time-consuming iterative measurements. In the current study, an alternative approach that can avoid lengthy iterative procedures while maintaining the accuracy of the ID-ICP/MS results was successfully investigated. We examined the effects of an extensively wide range of inexact-matching isotope ratios (approximately 75 %–130 %) in double ID-ICP/MS for elements with a wide mass range. Our experimental study, using gravimetrically prepared samples of Ca, Cd, Cu, Fe, Hg, Mg, Ni, Pb, and Zn, demonstrated that, despite deliberately introducing mismatching of isotope ratios, the accuracy of the ID-ICP/MS results remained consistent with relative measurement bias of typically less than 0.5 %. The absence of a systematic bias due to deviations in the sample blend isotope ratios from the target ratios of the calibration blends revealed that the variability due to an isotope ratio mismatch was sufficiently compensated for. Furthermore, the expanded measurement uncertainties were sufficiently small with negligible variations observed across the different matching ratios. Typically, they were less than 1 %, except for Fe, Hg, Pb, and Zn which were less than 2 %. This assertion is also supported by theoretically calculated error magnification factors. Consequently, it is feasible to directly utilize the marginally estimated mass fraction of the analyte of interest without extensive iterative measurements. The findings of this study provide robust data for ID-ICP/MS, allowing to circumvent lengthy iterative procedures while maintaining the accuracy and precision of the measurement results, particularly in the characterization of reference materials for elemental analysis.

instruments & instrumentation,physics, applied
High-precision Copper Isotopic Analysis Using a Nu Sapphire MC-ICP-MS

Jing Wang,Ben-Xun Su,Dong-Mei Tang,Qing-Han Yuan,Wen-Jun Li,Bing-Yu Gao,Zhi-An Bao,Ye Zhao

DOI: https://doi.org/10.1039/d2ja00197g

2022-01-01

Journal of Analytical Atomic Spectrometry

Abstract:Cu isotopic measurements using a Nu Sapphire CC-MC-ICP-MS.
Effects of Different Cone Combinations on Accurate and Precise Determination of Li Isotopic Composition by MC-ICP-MS

Long-Fei Gou,Zhang-Dong Jin,Li Deng,Mao-Yong He,Chun-Yao Liu

DOI: https://doi.org/10.1016/j.sab.2018.04.015

IF: 3.662

2018-01-01

Spectrochimica Acta Part B Atomic Spectroscopy

Abstract:The multiple collector inductively coupled plasma mass spectrometer (MC-ICP-MS) is booming to be a high-precision, fast, and accurate instrument in measuring lithium (Li) isotopes. Modified highly sensitive Jet sample and X skimmer cones have largely upgraded analytical sensitivity and reduced sample consumption with distinct instrumental mass bias behaviors. Herein, four available combinations of the sample and skimmer cones [Jet sample cone + X skimmer cone (Jet + X), Standard sample cone + X skimmer cone (Standard + X), Standard sample cone + H skimmer cone (Standard + H), and Jet sample cone + H skimmer cone (Jet + H)] were tested for their effects on peak shape, sensitivity, mass bias behavior, and accuracy and precision of Li isotopic measurements in solution mode. The results showed that all four combinations were able to attain an ideal peak shape by adjusting the associated parameters, with a positively linear relation between Li-7 (and Li-6) signals and Li concentrations. For a given Li concentration, the sensitivities were enhanced 3-7 times using the Standard + X, the Jet + H, and the Jet +X combinations compared to that of using the Standard + H. The enhanced sensitivity is attributable to more plasma ions introduced into the mass spectrometer through the Jet and X cones. Mass bias is distinct for different cone combinations, with a slight difference with various Li concentrations, indicating the neccesity of concentration match during measurement. Among the four cone combinations, the best reproducibility can be obtained by using the Standard + X cones to determine precise and accurate Li isotopes for samples. Furthermore, a pretreatment by 5% HNO3 and 0.1% HF, and then 2% HNO3 prior to analyses can minimize the memory effect of Li. (C) 2018 Elsevier B.V. All rights reserved.
Significantly Enhanced Robustness of K Isotope Analysis by Collision Cell MC-ICP-MS and Its Application to the Returned Lunar Samples by China's Chang'e-5 Project.

Shichao An,Jiayang Chen,Samuele Boschi,Weiqiang Li

DOI: https://doi.org/10.1021/acs.analchem.2c03989

IF: 7.4

2023-01-01

Analytical Chemistry

Abstract:Stable K isotope ratios, an emerging research tool for a wide range of problems, can be measured precisely with high sensitivity by using collision cell multicollector ICP mass spectrometers (CC-MC-ICP-MS). However, it has been shown that the accuracy of K isotope analysis by CC-MC-ICP-MS could be compromised severely by trace-level Ca contaminants, although the cause of such an effect remains poorly understood. Here, we report that the influence of Ca on K isotope analysis by CC-MC-ICP-MS can be dramatically reduced if D rather than H (the default gas) is used as the reaction gas that goes into the collision cell. This indicates the generation of positively charged calcium-hydride molecules in the collision cell. Usage of D as reaction gas circumvents the Ca-induced inaccuracy issues during K isotope analysis because CaD does not interfere with K as CaH does; as such, the robustness of K isotope analysis by CC-MC-ICP-MS is significantly enhanced. This improved method is verified by K isotope analysis of seven geostandards, and applied to China's Chang'e-5 lunar return samples at submicrogram K consumption, revealing significant K isotope variability within a 17 mg lunar basalt fragment.
Precise magnesium isotope analyses of high-K and low-Mg rocks by MC-ICP-MS

Zhian Bao,Kangjun Huang,Tianzheng Huang,Bing Shen,Chunlei Zong,Kaiyun Chen,Honglin Yuan

DOI: https://doi.org/10.1039/c9ja00002j

2019-01-01

Journal of Analytical Atomic Spectrometry

Abstract:This study presents a chemical protocol for the separation of Mg that is particularly adapted for diverse igneous rock samples, especially for high-K and low-Mg rocks. This protocol is based on a combination of three procedures: the removal of K from the samples using the precipitation procedure, followed by the separation of Fe and Ca using 2 mL of AG50W-X12 cation exchange resin, and finally the removal of Al, Ti, Na, and Fe elements using 0.5 mL of AG50W-X12 cation exchange resin. The effect of acidity and concentration mismatch as well as the matrix effect were rigorously evaluated using Nu Plasma II MCI-CP-MS with a wet plasma mode. The delta Mg-26 mean values of the GSB and Alfa Mg standard solutions are -2.05 +/- 0.05 parts per thousand (2 standard deviation (2s), n = 106) and -3.91 +/- 0.04 parts per thousand (2s, n = 51), respectively, which serve as in-house Mg standards in the State Key Laboratory of Continental Dynamics (SKLCD). The average delta Mg-26 value of one multi-elemental Mg standard GSB-1, made by adopting GSB with matrix elements, agrees well with the recommended value after precipitation and chromatographic separation. The long-term reproducibility, assessed by repeated measurements of Mg standard solutions and reference materials (RMs), is +/- 0.06 parts per thousand. The robustness of our method is further assessed by the replicated analyses of fifteen rock standards and olivine grains with large variations in MgO and K2O content.
An investigation of factors affecting high-precision Sr isotope analyses (87Sr/86Sr and δ88/86Sr) by MC-ICP-MS

Jiuyuan Wang,Yankun Di,Dan Asael,Noah J. Planavsky,Lidya G. Tarhan

DOI: https://doi.org/10.1016/j.chemgeo.2023.121365

IF: 3.9

2023-03-01

Chemical Geology

Abstract:The stable strontium (Sr) isotope system is being increasingly utilized to move forward our understanding of environmental, geological, and cosmological processes. Two analytical techniques are commonly used to measure stable Sr isotopes: 1) double-spike thermal ionization mass spectrometry (DS-TIMS) and 2) Zr-doped sample-standard bracketing multi-collector inductively coupled plasma mass spectrometry (Zr-doped SSB via MC-ICP-MS). Relative to DS-TIMS, Zr-doped SSB via MC-ICP-MS allows simultaneous determination of both 87Sr/86Sr and 88Sr/86Sr ratios, increasing measurement efficiency and sample throughput. However, several factors limit the analytical precision and accuracy of this technique, including matrix effects and potential intra- and inter-session offsets of measured isotope ratios. In this study, we evaluate potential causes for the observed offsets. We performed a series of experiments to assess the effect of different solution matrices and sources of contamination on Sr isotope measurements and to explore potential underlying mechanisms. Our tests show that incomplete Sr recovery during chromatographic separation, mismatches of Sr and Zr concentrations and acid molarity between samples and bracketing standards, and cation contamination all affect the precision and accuracy of Sr isotope measurements. We present evidence that analyses using our recommended updated preparation procedure for Zr-doped SSB via MC-ICP-MS can achieve a long-term reproducibility (2σSD: 87Sr/86Sr = ±0.000015 and δ88/86Sr = ±0.03 ‰) comparable to that of DS-TIMS.

geochemistry & geophysics

Experimental Investigation of Improved Tolerance for Concentration Mismatch in Potassium Isotope Analysis on a Hexapole Collision Cell MC-ICP-MS (nu Sapphire)

Precise measurement of stable potassium isotope ratios using a single focusing collision cell multi-collector ICP-MS

Author Response for "application of a “continuous‐acquisition‐method” to Potassium Isotope Measurement by Multi‐collector Inductively Coupled Plasma Mass Spectrometry"

High precision analysis of potassium stable isotopes using the collision/reaction cell Neoma MC-ICPMS/MS

Investigation of Nitrogen Addition, Position Effect and Mismatch Intensity Effect in Li Isotopic Analysis by Nanosecond Laser Ablation Multi-Collector Inductively Coupled Plasma Mass Spectrometry

Precise Measurement of 41 K/ 39 K Ratios by High-Resolution Multicollector Inductively Coupled Plasma Mass Spectrometry under a Dry and Hot Plasma Setting

Copper Isotope Compositions Measured Using a Sapphire Dual Path MC-ICPMS with a Collision/Reaction Cell

High-efficient purification and accurate determination of K isotope using MC-ICP-MS

Studies on ~(45)sc Background Interference and Treatment in ICP-MS

Potassium isotopic composition of various samples using a dual-path collision cell-capable multiple-collector inductively coupled plasma mass spectrometer, Nu instruments Sapphire

High precision potassium isotope analysis of geological samples using MC-ICP-MS

Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

High-precision Analysis of Potassium Isotopes by MC-ICP-MS Without Collision Cell Using Cool Plasma Technique in Low-Resolution Mode

High-precision Iron Isotopic Measurements in Low Resolution Using Collision Cell (CC)-MC-ICP-MS

An optimal separation method for high-precision K isotope analysis by using MC-ICP-MS with a dummy bucket

Compensation of isotope ratio mismatch in double isotope dilution inductively coupled plasma mass spectrometry (ID-ICP/MS)

High-precision Copper Isotopic Analysis Using a Nu Sapphire MC-ICP-MS

Effects of Different Cone Combinations on Accurate and Precise Determination of Li Isotopic Composition by MC-ICP-MS

Significantly Enhanced Robustness of K Isotope Analysis by Collision Cell MC-ICP-MS and Its Application to the Returned Lunar Samples by China's Chang'e-5 Project.

Precise magnesium isotope analyses of high-K and low-Mg rocks by MC-ICP-MS

An investigation of factors affecting high-precision Sr isotope analyses (87Sr/86Sr and δ88/86Sr) by MC-ICP-MS