Abstract:A numerical modeling study, based on 3D finite element method (FEM) simulation and 1D analytical solutions, has been carried out to evaluate the capabilities of two ac methods for measuring in-plane thermal conductivity of thin film deposited on the back of a suspended SiNx membrane setup. Two parallel metal strips are present on the top of the dielectric membrane. One strip (S1) serves as both heater and thermometer, while another one (S2) acts as thermometer only. For a modified phase shift (MPS) method, it is crucial to extract the in-plane thermal diffusivity from the phase shift of the temperature oscillation on S2. It was found that the frequency window for carrying out the data fitting became narrower as the in-plane thermal diffusivity of the composite membrane (<math>α∥,C</math>) increased, primarily due to the failure of the semi-infinite width assumption in the low frequency region. To ensure the validity of the method, the upper limit of <math>α∥,C</math> should not exceed ~1.8 × 10−5 m2 s−1 for the specific membrane dimension under consideration (1 × 1 mm2). On the other hand, inspired by a modified Ångström method proposed by Zhu recently, we suggest a new data reduction methodology which takes advantage of the phase shift on both S1 and S2 as well as the amplitude on S1. Based on the simulation results, it is expected that the non-ideality associated with the three "observables" may be at least partially canceled out. Therefore, the frequency window selection for carrying out the data fitting is not sensitive to the magnitude of <math>α∥,C</math> and the upper limit of measurable <math>αC,∥</math> can be further increased with respect to the MPS method. For typical specimen films whose in-plane thermal conductivity ranges from 0.84 W m−1 K−1 to 50 W m−1 K−1, the method proposed here yields a theoretical measurement uncertainty of less than 5%.

Calculation of Penetration Depth under Various Numerical Models for the Reflection-Type Two-Coil Mutual Inductance Technique

Determining the absolute value of magnetic penetration depth in small-sized superconducting films

Inductance and penetration depth measurements of polycrystalline NbN Films for all-NbN single flux quantum circuits

Development of in Situ Two-Coil Mutual Inductance Technique in a Multifunctional Scanning Tunneling Microscope.

Completely Analytical Calculation of Inductance for Circular Coils with Bilateral Finite Magnetic Cores at Arbitrary Position in WPT Systems

Mutual Inductance and Force Calculations Between Coaxial Bitter Coils and Superconducting Coils with Rectangular Cross Section

Mutual Inductance Calculation for Rectangular and Circular Coils with Parallel Axes

Completely Analytical Model of Inductance for Circular Coils with Bilateral Finite Magnetic Cores and Al Plates in WPT Systems

Calculations of the Microwave Conductivity of High-Tc Superconducting Thin-Films from Power Transmission Measurements

2D axisymmetric electromagnetic modeling of HTS coils based on T-A formulation with modified Newman boundary conditions

Three-dimensional simulation of the coupled electromagnetic-mechanical responses in a no-insulation racetrack coil

Numerical Study on Effective Thermal Conductivity of the Compacted Superconducting Magnet

Field and Current Distribution in Superconducting Film under Partial Field Penetration

A generalized phenomenological model for the magnetic field penetration and magnetization hysteresis loops of a type-II superconductor

Analytical Modelling and Calculation of Impedance and Pulsed Magnetic Field for Rectangular Meander Coil Based on Second Order Potential

A Novel Numerical Method to Evaluate the Heat Transfer Characteristics of Complicated Cicc Structures

Numerical modeling of in-plane thermal conductivity measurement methods based on a suspended membrane setup

Effective 3-D FEM for Large-Scale High Temperature Superconducting Racetrack Coil

Analysis of Current Distribution in Bi-2223/Ag Insert Pancake Coil

Inductance and Force Calculations of Circular Coils with Parallel Axes Shielded by a Cuboid of High Permeability

Inductance extraction of superconductor structures with internal current sources